Powermatic 2415, 2013 operating instructions Introduction Specifications

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a Powermatic Model 2013 or 2415 Band Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

Model Number		2013	........................................................ 2415
Stock Number (2HP, 1Ph, 230V)		1791257	............................................................ na
Stock Number (3HP, 1Ph, 230V)		na	.................................................. 1791259
Stock Number (3HP, 3Ph, 230/460V*)		1791258	............................................................ na
Stock Number (5HP, 3Ph, 230/460V*)		na	.................................................. 1791260
Blade Speeds (SFPM)		2,000 and 4,000	...................................... 2,000 and 4,000
Thickness Capacity, Maximum (in.)	.....................................	12-3/8	......................................................14-3/8
Width Capacity, Maximum (in.)		20	............................................................ 24
Table Size (in.)		24 x 24	.................................................... 24 x 28
Table Tilt (deg.)		45 right, 10 left	........................................ 45 right, 10 left
Approximate Blade Length (in.)		158-1/2	....................................................180-1/2
Blade Widths (in.)	1/4 minimum, 1-1/2 maximum		................ 1/4 minimum, 1-1/2 maximum
Switch		magnetic	................................................. magnetic
Dust Collection Minimum CFM Required		600	.......................................................... 600
Table Height at 90o (in.)		35-1/4	......................................................35-3/8
Floor Space Required (in.)		39 x 45-1/2	.............................................. 39 x 51-1/2
Shipping Weight (lbs.)		970	........................................................ 1190

* pre-wired 230 volt

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7