Introduction
Each model inverter has a single phase output marked with this symbol: ∅ Each inverter puts out a sine wave waveform marked with this symbol:
Components and Accessories
Table 2 Components and Accessories
Installed Components
Battery Terminal Cover, red
Battery Terminal Cover, black
AC Conduit Plate
DC Cover (DCC)
Included in Box
GFX Series Installation Manual
GFX Series Operator’s Manual
“WARNING ELECTRICAL SHOCK” sticker
Remote Temperature Sensor (RTS)
Silicone Grease Packet
DCC (DC COVER)
Covers the DC terminal area and provides space to mount other components such as a DC current shunt.
AC CONDUIT PLATE Connects to AC conduit for installations
which do not utilize OutBack’s optional FLEXware conduit boxes.
BATTERY TERMINAL COVER
Protects terminals from accidental contact. Made of stiff plastic with a
Always keep covers installed during normal operation.
When required, remove covers carefully using a
The DCC does not replace the battery terminal covers; they must be installed in addition to the DCC.
Figure 2 GFX Components
10 |