Outback Power Systems GFX1448E, GFX1424E Location and Environmental Requirements, Dimensions

Page 17

Installation

Location and Environmental Requirements

The International Series GFX inverters can be located outdoors, but OutBack still recommends that they be protected from the environment.

If protected from the environment, the inverter can mount in any position or orientation. If exposed to the environment, it cannot be placed upside-down to ensure that water will not accumulate under the DC cover. (It can be mounted in any other position or orientation.)

For installations where the inverter may be exposed to water spray, the inverter must be mounted either with the base down (shelf mounting) or with the AC wiring compartment facing down (wall mounting). If mounted with the base down, water cannot be allowed to accumulate around the inverter’s base. There is a drainage system on the base of the inverter to dispel condensation. If submerged, water can enter this drain and cause failure.

The inverter will perform more efficiently in locations offering plenty of air circulation. The recommended minimum clearance is 5 to 10 cm (2 to 4 inches) on all sides of the inverter.

The inverter will function to all of its specifications if operated in a range of 0 °C to 50 °C (32 °F to 122 °F). Note that the inverter’s maximum wattage will derate in temperatures above 25 °C.

The inverter will function, but will not necessarily meet its specifications, if operated in a temperature range of –40 °C to 60 °C (–40 °F to 140 °F). This is also the allowable temperature range for storage. (The specifications are listed in the International Series GFX Operator’s Manual.)

Dimensions

Length 41 cm (16.25”)

Width

Height

21 cm (8.25”)

33 cm (13”)

Figure 4

Dimensions

900-0111-01-00 Rev A

15

Image 17
Contents International Series GFX Inverter/Charger Trademarks Audience Symbols UsedDefinitions General SafetyInverter Safety Personal SafetyBattery Safety Recycling Information Regulatory ListingsEarth 911.com OurEarth.orgEuroRecycle.net Table of Contents List of Tables Models Welcome to OutBack Power TechnologiesIntroduction Components and AccessoriesApplications PlanningGenerator Battery BankRenewable Energy Planning Planning Location and Environmental Requirements DimensionsMounting Tools RequiredTerminals and Ports Terminals, Ports, and FeaturesDC Ground Lug GroundingDC Conductor Size and Torque Requirements Inverter DC WiringRequired Order of Battery Cable Hardware Multiple AC Sources AC WiringAccessory Connections Accessory WiringAUX Connections for Vent Fan Example AUX WiringAutomatic Generator Start AGS Two-Wire Generator Start ExampleThree-Wire Generator Start Example Single-Inverter Wiring Single-Inverter InstallationsStacking Connections Multiple-Inverter Installations StackingExample of Parallel Stacking Arrangement Three Inverters Parallel Stacking Dual-Stack and LargerParallel Wiring Four Inverters Example of Three-Phase Stacking Arrangement Three Inverters Three-Phase StackingThree-Phase Wiring Three Inverters Functional Test Installation Installation Index Index Index Arlington, WA 98223 USA 34.93.654.9568 360.435.6030 Rev a
Related manuals
Manual 64 pages 8.19 Kb

GFX1448E, GFX1424E, GFX1312E specifications

Outback Power Systems has long been recognized for its innovation and reliability in the field of renewable energy solutions, particularly with its GFX series of grid-tied inverters. The GFX1312E, GFX1424E, and GFX1448E models exemplify their commitment to quality and performance, making them ideal choices for both residential and commercial applications.

The GFX1312E is designed to deliver a solid 1300 watts of continuous output power at 12 volts, offering efficient energy conversion for smaller solar setups or off-grid living situations. Its compact design allows for easy installation, while advanced engineering ensures high performance even in challenging conditions. The GFX1312E features a pure sine wave output, which is critical for sensitive electronic devices, ensuring compatibility and safeguarding against potential damage.

Moving up in power capacity, the GFX1424E operates at 1400 watts with a 24-volt configuration. This model is particularly well-suited for medium-sized solar energy systems. It supports 120/240 volts split-phase output, providing greater flexibility for various household appliances and ensuring that users can maximize their energy usage with efficiency. The GFX1424E also incorporates an extensive array of intelligent charging profiles that optimize battery performance and longevity.

The GFX1448E caps the series with impressive 1400 watts of continuous output at 48 volts, catering primarily to larger installations and those requiring more robust energy management solutions. This inverter is equipped with Outback's patented GridZero™ technology, allowing for seamless integration of solar energy production with utility power, helping users to minimize grid dependence while maximizing savings. With advanced features like backup capability and grid-interactive operation, this model is highly versatile.

All three models share key characteristics such as network connectivity through the Outback Power's MATE series of controllers, enabling real-time monitoring and system management. They are designed for durability and have protective features against overloads and short circuits, ensuring reliable performance over time. With their modular design, users can easily scale their system by connecting multiple units, making these inverters a practical choice for expanding energy needs.

In summary, the Outback Power Systems GFX1312E, GFX1424E, and GFX1448E inverters provide top-tier options for those looking to harness solar energy efficiently. Their respective power outputs, advanced technologies, and user-friendly interfaces position them as excellent choices for both residential and commercial energy solutions, underscoring Outback's reputation as a leader in the renewable energy market.