Singer 6184-21, 6184-01 manual Maintenance, Accessories, Warranty

Page 8

MAINTENANCE

WARNING!

To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tools

Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mount- ing, broken parts and any other condition that may affect its safe opera- tion. If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before further use. Do not use a dam- aged tool. Tag damaged tools “DO NOT USE” until repaired (see “Repairs”).

Under normal conditions, relubrication is not necessary until the motor brushes need to be replaced. After six months to one year, depending on use, return your tool to the nearest MILWAUKEE service facility for the following:

Lubrication

Brush inspection and replacement

Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

Electrical inspection (switch, cord, armature, etc.)

Testing to assure proper mechanical and electrical operation

WARNING!

To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow a liquid to flow inside the tool.

Cleaning

Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs

If your tool is damaged, return the entire tool to the nearest service center listed on the back cover of this operator’s manual.

page 8

ACCESSORIES

WARNING!

To reduce the risk of injury, always unplug the tool before attaching or removing accessories. Use only specifically recommended accesso- ries. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog. To obtain a catalog, contact your local distributor or a service center listed on the back cover of this operator’s manual.

14" Abrasive Cut-Off Wheels

Cat. No. 49-93-6105

Cat. No. 49-93-6106

Cat. No. 49-93-6107

Cat. No. 49-93-6108

12" Abrasive Cut-Off Wheels

Cat. No. 49-93-6101

Cat. No. 49-93-6102

Cat. No. 49-93-6103

Cat. No. 49-93-6104

12" Dry Cutting Diamond Blade

Cat. No. 49-93-8030

 

Wheel Guard

Shoe

Cat. No. 43-54-0775

Cat. No. 43-40-0315

Top Flange

Back Flange

Cat. No. 43-34-0780

Cat. No. 43-34-0785

Flange Nut 20mm

Flange Nut 1"

Cat. No. 44-40-0605

Cat. No. 44-40-0705

Hex Wrench

Open End Wrench

Cat. No. 49-96-0225

Cat. No. 49-96-4121

WARRANTY

Every MILWAUKEE product is warranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace any product which examination proves to be defective in material or workmanship.

Limitations: This warranty does not cover: 1) repairs made or at- tempted by other than MILWAUKEE or MILWAUKEE Authorized Service Station personnel; 2) normal wear and tear; 3) abuse; 4) misuse; 5) improper maintenance; 6) continued use after partial failure; 7) tools that have been modified; or product used with an improper accessory.

Battery Packs are warranted for one (1) year from the date of purchase.

Should a problem develop, return the complete product to any MILWAUKEE Factory Service Center or MILWAUKEE Authorized Ser- vice Station, freight prepaid and insured. If inspection shows the prob- lem is caused by a defect in material or workmanship, all repairs or a replacement will be made at no charge and the product will be returned, transportation prepaid. No other warranty, written or verbal, is authorized.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THISWARRANTYIS IN LIEU OFALLOTHER WARRANTIES, EXPRESSED OR IMPLIEDWHETHERFORMERCHANTABILITYORFITNESSFORPARTICULAR USEORPURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state. In those states that do not allow the exclusion of implied warranties or limitations of inciden- tal or consequential damages, the above limitations or exclusions may not apply to you.

Image 8
Contents Operators Manual General Safety Rules Read and Understand ALL Instructions Electrical SafetyPersonal Safety ServiceWheel Instructions Arbor Hole Size At least Thickness 6184-01 5000 Or 20 mm FunctionaldescriptionCut-Off Grinder Capacities Cat Wheel Grounding Extension CordsInstalling Side Handle Tool AssemblyInstalling and Removing Shoe Fig Operation Warranty MaintenanceAccessories Conservez CES Instructions Aire DE Travail SécuritéélectriqueUtilisation ET Entretien DES Outils Sécurité DES PersonnesMesures DE Sécurité Spéciales Instructions relatives aux disquesDescriptionfonctionnelle 20 mmCalibres minimaux recommandés pour Les cordons de rallonge Mise À LA Terre AvertissementCordons DE Rallonge Directives pour l’emploi des cordons de rallongeInstallation et retrait des disques à tronçonner Fig Installation et retrait de la semelle FigInstallation de la poignée latérale Montage DE Loutil AvertissementManiement Avertissement Garantie Maintenance AvertissementAccessoires Avertissement Guarde Estas Instrucciones Area DE Trabajo SeguridadelectricaUSO Y Mantenimiento DE LA Herramienta Seguridad PersonalReglas Especificas DE Seguridad Instrucciones para el disco abrasivoCapacidades de la disco abrasivo Catálogo Descripcionfuncional20mm Guías para el uso de cables de extensión Tierra ¡ADVERTENCIAExtensiónes Eléctricas Cómo instalar el mango lateral Ensambaje DE LA Herramienta ¡ADVERTENCIACómo instalar y sacar la zapata Fig Operacion ¡ADVERTENCIA Reparaciones Mantenimiento ¡ADVERTENCIAGarantia Accesorios ¡ADVERTENCIA United States

6184-21, 6184-01 specifications

The Singer 6184-01 and 6184-21 sewing machines represent a blend of classic design and modern technology, catering to both novice and experienced sewists. Renowned for their reliability, these machines offer a host of features that enhance the sewing experience and make them suitable for various projects.

One of the standout characteristics of the Singer 6184 series is its robust construction. The machines are built with a sturdy metal frame that not only ensures longevity but also minimizes vibration during use, resulting in more accurate stitches. This stability allows users to tackle heavier fabrics with ease, such as denim and canvas, making these models versatile choices for a range of sewing applications.

The 6184 series is equipped with a powerful motor that provides consistent sewing speed, ensuring smooth operation across different fabric types. With multiple stitch options, including straight, zigzag, and decorative patterns, the machines offer flexibility for creative projects. Each model features a user-friendly dial interface that allows for quick stitch selection, making it easy for beginners to navigate.

Another key feature of the Singer 6184 series is the automatic needle threader, which simplifies the threading process and saves time. Additionally, the top drop-in bobbin system is designed for easy bobbin changes and prevents tangling, giving users confidence while sewing. The clear cover over the bobbin area allows for easy monitoring of thread levels.

The 6184-21 model includes advanced features such as adjustable stitch length and width, allowing for full customization based on individual project needs. This flexibility is complemented by a heavy-duty presser foot that provides excellent fabric feed, ensuring even stitching regardless of the material.

Both models come with a range of accessories, including multiple presser feet, a seam ripper, and an instructional manual that guides users through the machine’s features. These accessories enhance the sewing experience, enabling users to expand their skills and experiment with various techniques.

In conclusion, the Singer 6184-01 and 6184-21 sewing machines stand out in the market for their durability, ease of use, and advanced features. With a combination of classic craftsmanship and modern technology, these machines are ideal for anyone looking to embark on their sewing journey or expand their existing skills, making them a reliable choice for crafters of all levels.