Grizzly G9957, G5959 instruction manual Unpacking, Piece Inventory

Unpacking

The Model G5959/9957 is shipped from the man- ufacturer in a carefully packed carton. If you dis- cover the machine is damaged after you have signed for delivery, please call Customer Service immediately for advice.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

The G5959/9957 is a heavy machine, 1000 lbs. shipping weight. DO NOT over-exert yourself while unpack- ing or moving your machine – you will need assistance and power equipment. Serious per- sonal injury may occur if safe moving methods are not followed.

Make sure floor structure is capable of supporting the combined weight of the machine parts and

Piece Inventory

After all the parts have been removed from their containers, you should have:

1.Table Saw Cabinet (Not Shown)

2.Miter Gauge

3.Extension Wings (2)

4.Fence

5.Splitter/Guard Assembly

6.Splitter/Guard Support

7.Hardware Bag

8.Arbor Spanner Wrench

9.Open End Wrench (2)

10.Allen¨ Wrench Set

11.Arbor Extension Assembly

12.Motor Cover

13.Dado Table Insert

14.Standard Table Insert (Not Shown)

15.Fence Agle Irons (2)

16.Fence Rail

17.Tool Box

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them; or for the sake of expediency, replacements can be obtained at your local hard- ware store.

15

3

57

6 8 10

people.

Some metal parts may have sharp edges on them after they are

9

		11
13	12	2

15

16

17

formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

4

Figure 6. G5959/9957 component layout.

G5959/G9957 12" Table Saw -11-