SECTION 8: CLOSURE
The following pages contain general machine data, troubleshooting guide, parts diagram, parts list and Warranty/Return information for your Model G5959/9957.
If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call the Customer Service Department. Our trained service technicians will be glad to help you.
If you have comments dealing specifically with this manual, please write to our Bellingham, Washington location using the address in the Introduction. The specifications, drawings, and photographs illustrated in this manual represent the Model G5959/9957 as supplied when the manual was prepared. However, due to GrizzlyÕs policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly. Whenever possible, though, we send manual updates to all owners of a particular tool or machine. Should you receive one, add the new information to this manual and keep it for refer- ence.
We have included some important safety mea- sures that are essential to the operation of this machine. While most safety measures are gener- ally universal, each workshop is different and safety rules should be considered as they apply to your specific situation.
Operating this equipment has the potential for flying debris to cause eye injury. Always wear safety glasses or goggles when oper- ating equipment. Everyday glasses or read- ing glasses only have impact resistant lens- es, they are not safety glasses. Be certain the safety glasses you wear meet the appro- priate standards of the American National Standards Institute (ANSI).
We recommend you keep a copy of our current catalog for complete information regarding war- ranty and return policy. If you need additional technical information relating to this machine, or if you need general assistance or replacement parts, please contact the Customer Service Department listed in the introduction.
Additional information sources are necessary to realize the full potential of this machine. Trade journals, woodworking magazines, and your local library are good places to start.
The Model G5959/9957 was specifically designed for woodcutting operations. DO NOT MODIFY AND/OR USE THIS MACHINE FOR ANY OTHER PURPOSE. Modifications or improper use of this tool will void the warranty. If you are confused about any aspect of this machine, DO NOT use it until all your questions have been answered. Serious personal injury may occur.
Like all power tools, there is danger asso- ciated with the Model G5959/9957. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this tool with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
G5959/G9957 12" Table Saw |