Bard W30H1, W24H1, W18H1, W48H1, W36H1, W42H1 Vent & Control Options, W18, W24 W30, W36 W42, W48, W60

TABLE 11

VENT & CONTROL OPTIONS

Part Number Description

W18, W24 W30, W36 W42, W48, W60

CMC-14	ODT		X	X	X
CMC-15	Start Kit (230V 1-Phase only)	1	X	X	X
SK111	Start Kit (230V 1-Phase only)	2	X	X	X
CMC-28	LAC		X	X	X
BFAD-2	Barometric Fresh Air Damper - Standard		X
BOP-2	Blank Off Plate		X
MFAD-2	Motorized Fresh Air Damper		X
CRV-2	Commercial Ventilator - Spring Return		X
EIFM-2B	Economizer		X
ERVF-A2	Energy Recovery Ventilator - 230 Volt		X
BFAD-3	Barometric Fresh Air Damper - Standard			X
BOP-3	Blank Off Plate			X
MFAD-3	Motorized Fresh Air Damper			X
CRVS-3	Commercial Ventilator - Spring Return			X
CRVP-3	Commercial Ventilator - Power Return			X
EIFM-3C	Economizer			X
ERVF-A3	Energy Recovery Ventilator - 230 Volt			X
ERVF-C3	Energy Recovery Ventilator - 460 Volt			X
BFAD-5	Barometric Fresh Air Damper - Standard				X
BOP-5	Blank Off Plate				X
MFAD-5	Motorized Fresh Air Damper				X
CRVS-5	Commercial Ventilator - Spring Return				X
CRVP-5	Commercial Ventilator - Power Return				X
EIFM-5C	Economizer				X
ERVF-A5	Energy Recovery Ventilator - 230 Volt				X
ERVF-C5	Energy Recovery Ventilator - 460 Volt				X

1PTCR Start Kit can be used with all -A single phase models. Increases starting torque 2-3x. Not used for -B or -C three phase models. Do not use if SK111 is used.

2Start Capacitor and potential relay start kit can be used with all -A single phase models. Increases starting torque 9x. Not used for -B or -C three phase models. Do not use if CMC-15 is used.

Manual	2100-511
Page	27 of 27