An Overview of the Cordless TrimMaster 18™ Finish Nailer
Description
The TrimMaster 18™ Finish nailer is a
In order for you to fully understand the information contained in this manual, you need a basic understanding of the TrimMaster 18™ Finish nailer. As you can see in the illustration below, the Impulse Finish nailer is made up of three major areas: handle, motor, and magazine.
As you examine the TrimMaster 18™ Finish nailer, become familiar with the three major areas and the various components located in each of them.
The Handle contains the fuel cell, indicator light, and the trigger.
The Motor contains the cover and filter, the motor housing, the nose, and the work contacting element.
Specifications
Dimensions: | 4 lbs 14oz. |
Height | |
Length | 11 inches |
Magazine | Straight 18 Ga. |
Cycle Rate: Intermittent Operation – 2 to 3 nails per second
Continuous Operation – 500 nails per hour
NOTE: Exceeding these cycle rates could cause the tool to overheat, resulting in loss of performance or damage to tool components.
By using the TrimMaster18™Finish nailer at its recommended cycle rate, you will be able to drive several thousand nails in a typical workday.
The Magazine contains the components to load and control the fastener and the battery for the Cordless18 Finish nailer.
Fasteners: 18 gauge, straight
Magazine Capacity: 2 nail strips, or 100 fasteners
cap
motor housing
Motor
quick clear cover
removable cover & filter
P
Battery : 6 volts DC - Provides enough energy to drive approximately 4000 fasteners on a full charge.
Fuel Cell: Liquid hydrocarbon - Provides enough fuel to drive approximately 1200 fasteners. (Shelf life 12 months)
fuel cell compartment
Handle (soft grip)
reversable belt hook
magazine release latch
soft
touchMagazine trigger
battery indicator light
(opposite side)
adjustable |
|
|
|
|
|
| |
depth of drive |
|
| nail count indicator |
|
| ||
(opposite side) |
|
| |
|
|
| |
|
|
|
|
| follower | battery compartment | |
| (opposite side) | ||
| |||
|
|
| |
3