Harbor Freight Tools 93760 operating instructions Framing Nailer

Page 1

®

FRAMING NAILER

28 DEGREE - FULL CLIP

Model 93760

ASSEMBLY AND OPERATING INSTRUCTIONS

(Due to continuing improvements, actual product may differ slightly from the product described herein.)

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

Image 1
Contents For technical questions, please call Framing NailerSafety Warnings and Precautions Product SpecificationsSave this Manual REV 11/06, 01/07 SKU For technical questions, please callSKU For technical questions, please call SKU For technical questions, please call Unpacking California Health & Safety Code 25249.5, et seqOperation Testing the Full Sequential Safety Trip MechanismLoading Nails Do not exceed the maximum 125 PSI Operating the NailerFor technical questions, please call Rev 11/06 SKU Remove the two Screws 35. One Screw on each side of Magazine Clearing JamsAnytime any maintenance or repairs are done, First INSPECTION, MAINTENANCE, and CleaningProblem Possible Solution TroubleshootingDescription Parts ListAssembly Diagram Please Read the Following Carefully