Harbor Freight Tools 93760 Unpacking, California Health & Safety Code 25249.5, et seq

Page 5

25.Take caution, as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When nailing these materials extra care should be taken to avoid inhalation and minimize skin contact.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known (to the State of California) to cause cancer, birth defects, or other reproductive harm.

Some examples of these chemicals are:

*Lead from lead-based paints,

*Crystalline silica from bricks, cement, and other masonry products,

*Arsenic and chromium from chemically treated lumber.

(California Health & Safety Code 25249.5, et seq.)

26.Stay within air pressure capacity. Never operate the Nailer above 125 PSI.

27.Hold tool away from head and body. During operation the Nailer may kick back, causing injury.

28.Transport Nailer safely. Always disconnect air supply when moving the tool in the workplace. Carry the tool by the handle to avoid contact with the trigger.

29.Avoid working alone. If an accident happens, an assistant can bring help.

30.Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect the tool performance.

31. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

UNPACKING

When unpacking, check to make sure that all accessories listed on page 12 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Rev 11/06

SKU 93760 For technical questions, please call 1-800-444-3353 PAGE 5

Image 5
Contents For technical questions, please call Framing NailerSafety Warnings and Precautions Product SpecificationsSave this Manual REV 11/06, 01/07 SKU For technical questions, please callSKU For technical questions, please call SKU For technical questions, please call Unpacking California Health & Safety Code 25249.5, et seqOperation Testing the Full Sequential Safety Trip MechanismLoading Nails For technical questions, please call Rev 11/06 SKU Operating the NailerDo not exceed the maximum 125 PSI Remove the two Screws 35. One Screw on each side of Magazine Clearing JamsAnytime any maintenance or repairs are done, First INSPECTION, MAINTENANCE, and CleaningProblem Possible Solution TroubleshootingDescription Parts ListAssembly Diagram Please Read the Following Carefully