Anytime any maintenance or repairs are done (including clearing jams), FIRST:
1.Disconnect the Nailer from its air supply.
2.Empty the Magazine Assembly (73) completely.
3.Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any Nails.
4.Always leave the Magazine Assembly (73) open during maintenance. The Magazine is spring loaded, and may cause parts or a Nail to fly out of the Nailer.
CLEARING JAMS
1.Occasionally, a Nail may become jammed in the firing mechanism of the Nailer, making the tool inoperable. To remove a jammed Nail, disconnect the Nailer from its air supply. Empty the Magazine Assembly (73) completely of Nails. Attempt to fire the Nailer into a piece of scrap wood to ensure it is disconnected and is incapable of firing any Nails.
2.Use a pair of needle nose pliers to remove a jammed Nail from the back of the Nose (40). If a jammed Nail cannot be removed as described, it may be necessary to disassemble the Magazine (73) as follows:
CAUTION: If you are not clear about how to remove and
3.Remove the two Screws (35). (One Screw on each side of Magazine (73).
4.Remove the two Nuts (76).
5.Slide the Magazine (73) back, off of the Nose (40).
6.After clearing the jammed Nail,
MAGAZINE (73) | MAGAZINE (73) |
|
|
| SCREW |
|
|
|
|
| |
|
|
| (35) | NUT |
|
|
|
| |
|
| NOSE (40) |
| (76) |
|
|
|
SKU 93760 For technical questions, please call