Global Machinery Company LS8B instruction manual Redeye

Page 1

INSTRUCTION MANUAL

REDEYE®

250W 200mm Band Saw with Laser Line Generator

•Melbourne • Perth • Auckland • Hong Kong • Shanghai

•Taipei • New York • Verona • London • Paris

LS8B

030710 MW ED7

Image 1

Contents Redeye Contents Safety rules for laser lights SpecificationsLaser Light Laser Radiation Safety instructionsAdditional safety rules for band saws Unpacking AccessoriesSupport the work properly Saw blade Know your productUpper blade guide adjustment AssemblyMounting Workpiece maximum distance 3mmPress the guide pins together against the band saw blade Lower blade guide adjustmentTighten the thrust bearing locking screw Tighten the guide pin locking screwsAdjusting the rip fence Housing doorsUpper housing door Touch the saw bladeAdjusting the saw blade tension Adjusting the bevel angleAdjusting the blade tracking Tighten the table locking knob 20 and table setting lever Installing and removing band saw bladesDust collector connection Turning on and offIf required, adjust the saw blade tracking Open both housing doorsOperation Remove the rip fence 13 from the tableChanging the batteries Using the Redeye laser line generatorDo not mix old and new batteries Power cord maintenance MaintenanceSave this Manual for future reference