Basic Sanding, Tip | Woodstock W1738, W1737 specification

W1737/W1738 Owner's Manual (Mfg. 10/09+)

OPERATIONS

Basic Sanding

To achieve the best sanding results experiment with conveyor feed rate, sanding depth, various grits of sandpaper, and oscillation speed.

To sand a workpiece, do these steps:

1.Measure the workpiece and record the thickest spot.

1.With the table already calibrated, turn the sander ON, set the feed rate.

4.Type in the thickness of your workpiece using the numeric key pad (Example: for a 2" thick workpiece type 2.000"), and press the table start key:

Note: The upper left corner input LED will illuminate (See Figure 20), and the display numbers will flash when entering measurements.

5.Measure the sanding depth needed. Example: let’s

say you need 1⁄64 ". Note: Removing too much material can burn the workpiece, tear the paper, or give poor sanding results.

6.Convert 1⁄64" fraction to a 0.016" decimal measurement using the conversion table on the sander.

7.Calculate the resulting workpiece thickness (2.000"— 0.016" = 1.984"), and type that thickness (1.984") on the key pad.

8. Press the table start key:	The table will raise to
the new setting.

Note: The computer rounds the sanding thickness measurements in increments of 0.005".

Note: The lower left corner Run LED will illuminate and the display numbers will glow steadily when measurements have been accepted and the table is auto-adjusting. When the correct sanding depth is achieved, the lower left corner Run LED will turn off and the final resulting workpiece thickness is displayed.

10.Start the conveyor, stand to the side as shown in Figure 22, and feed the workpiece into the sander.

11.Observe the amp draw meter, and press the table down arrow key on the key pad to reduce the sanding depth if the amp load meter indicates motor overload.

12.Remove the workpiece from the outfeed side, which is now sanded down 1⁄64". Re-sand the workpiece

a couple of times more at this depth to ensure a consistent sanding depth.

13.Add a new sanding depth the same way as in Steps 7 and 8, and sand again.

-20-

Tip

For best results when finish sanding, feed each piece through the sander two or three times without adjusting the depth of cut. Turn the workpiece 180˚ and feed it through two or three more times at this same depth. As always, use your best judgement. If you no longer hear the sanding belt making contact with the workpiece on successive cuts, then no further passes are needed at that depth.

Figure 22. Operator feeding workpiece at correct body position and out of the way of potential kickback.

W1737, W1738 specifications

Woodstock W1738 is a cutting-edge digital audio workstation (DAW) designed for musicians, producers, and sound engineers seeking a versatile platform for music production. This innovative software solutions suite combines user-friendly interfaces with powerful features and state-of-the-art technologies to create an exceptional audio experience.

At its core, the Woodstock W1738 prioritizes ease of use while maintaining high functionality. The intuitive layout accommodates users of all skill levels, from beginners to seasoned professionals. The main workspace is organized in a way that promotes efficiency, allowing users to access crucial tools and features easily. The software supports various audio formats, ensuring compatibility with a wide range of audio files and devices.

One of the standout features of the Woodstock W1738 is its advanced virtual instrument library. Offering a rich selection of synthesized sounds, acoustic instruments, and samples, it caters to various genres and styles. Users can easily integrate these instruments into their compositions, enhancing creativity and inspiration. Additionally, the library includes customizable effects that allow artists to shape their sounds uniquely.

The W1738 sets itself apart with its real-time collaboration capabilities. Musicians from different locations can work together seamlessly, sharing tracks, edits, and ideas instantly. This feature broadens the creative possibilities, enabling artists to collaborate in ways previously inconceivable.

In terms of audio editing, the Woodstock W1738 boasts powerful tools that include pitch correction, time stretching, and audio restoration. These technologies allow users to manipulate sound with precision, ensuring that every note and beat aligns perfectly with their vision. The software also includes a robust mixer with multitrack recording functionalities that make it easy to handle complex projects.

Furthermore, the integration of artificial intelligence features within the W1738 enhances user experience by providing automatic mixing suggestions, mastering presets, and intelligent sound analysis. These AI capabilities not only streamline the production process but also inspire users to explore new creative avenues.

The Woodstock W1738 embodies a commitment to high-quality audio resolution, supporting up to 32-bit/192 kHz audio fidelity. This ensures that the end result is nothing short of professional-grade quality, suitable for commercial release or personal enjoyment.

Overall, the Woodstock W1738 serves as a dynamic platform for audio production that combines innovative technology, ease of use, and collaborative features, making it an essential tool for modern musicians and producers seeking to express their creativity.