Woodstock W1738, W1737 owner manual Belt Tracking Safety Switch, Belt Tension Safety Switch

Page 34

W1737/W1738 Owner's Manual (Mfg. 10/09+)

SERVICE

Belt Tracking Safety

Switch

Belt tracking safety switches are placed on both sides of the belt to act as emergency machine stops if the belt travels too far to one side during oscillation. See Figure 48.

To adjust the belt tracking safety switches, do these steps:

1.TURN OFF and LOCK the master power switch so that no power can go to your sander!

2.Make sure the belt tracking and oscillation is adjusted.

3.Release the belt tension, center the sanding belt on the top roller, then re-tension the belt.

4.Measure the distance from the edge of the sanding belt to the ceramic rod protruding from the switch.

5.Loosen the adjustment bolt shown in Figure 48, and move the switch so the belt and the ceramic rod have approximately 12" clearance from each other.

6.Tighten the bolt and repeat the adjustment with the other side if necessary.

7.Start the sander and make sure it is working properly.

Belt Tension Safety

Switch

The belt tension safety switch shuts the sanding motor OFF if the belt breaks or has no tension when the lock flange pushes the belt tension safety switch lever. See

Figures 49 and 50.

To adjust the belt tension safety switch, do these steps:

1.TURN OFF and LOCK your master power switch.

2.Apply normal system air pressure of 70 PSI, and tension the belt.

3.Loosen the mounting screw and position the switch so the lever is in the center of the lock flange hole.

4.Re-tighten the screw and test the switch operation.

Adjustment

Bolt

Figure 48. Tracking safety switch

adjustment bolt.

Belt Tension

Safety Switch

Figure 49. Belt tension safety switch

location.

Mounting

Screw

Lock

Flange

Switch

Lever

Figure 50. Belt Tension safety switch.

-32-

Image 34
Contents OWNERS MANUAL Grinding, drilling, and other construction activities Contents Service About Your New Sander Woodstock Technical SupportSpecifications W1737 and W1738 Independent Motor Control SystemControls and Features W1737/W1738 Standard Safety Instructions Disconnect machine when cleaning, adjusting or servicingKeep stable footing and balance at all times Additional Safety Instructions for Sanders Avoiding Potential Injuries Correct body and hand positioningPhase Converter Connection 220V/440V OperationDisconnect the sander from the power source 440V Conversion W1738Box Contents UnpackingMachine Placement Cleaning MachineAir Hose Installation Sanding Belt InstallationBreather Pin Dust CollectionControl Panel Sanding Load Amp MeterTest Run General OperationTo complete the test run, do these steps Selecting Sandpaper Setting Feed SpeedUsing the Amp Draw Meter To change the feed belt speed do these stepsCalibrating the Table Emergency StopKeypad and Display To use the emergency stop, do these stepsTip Basic SandingTo sand a workpiece, do these steps Jet Air Flow Using the PlatenComplete Belt Tracking on Belt tracking adjustment Belt TrackingBelt Oscillation Speed Oscillation systemGeneral LubricationCleaning Belts Maintaining Air SystemTable Stop Switches To adjust table stop switches, do these stepsTo check the condition of the brake pads, do these steps Brake ServiceRelieve the air pressure Remove the upper belt adjustment nut and washer Changing V-BeltsSanding motor V-belt Adjustment Tension Nut Belt TensionTo adjust the table parallelism, do these steps Table ParallelismTo adjust the feed belt tension and tracking, do these steps Feed Belt Tension TrackingBelt Tracking Safety Switch Belt Tension Safety SwitchBelt and pressure roller Adjustments Pressure RollersW1737 220V Single-Phase Motor Connection General Motor and Transformer ConnectionW1737 and W1738 Control Panel Wiring W1737 General Wiring Diagram W1738 General Wiring Diagram Connects To The T Terminal OnlyW1738 Electrical Box Component Locations Box Wiring Diagram W1737 Electrical Box Component Locations W1737 Electrical Electrical Parts W1738 440V Conversion Parts Tools and Cabinet Parts Sandpaper #180 Sanding Motor and Frame Parts Machine Frame Table Lift System Parts Electrical BOX W1738 Feed System and Conveyor Parts XPB16 Upper Roller System Parts Eccentric ROD Air System Parts Connector 1/4N X 1/8T Sanding Drum and Roller Parts PART
# Description Safety Label Placement Description Parts Troubleshooting Symptom Possible Cause How To RemedyWarranty Warranty Registration CommentsWoodstock international, inc. p.o. box Bellingham, wa Page High Quality Machines and Tools
Related manuals
Manual 68 pages 54.5 Kb

W1737, W1738 specifications

Woodstock W1738 is a cutting-edge digital audio workstation (DAW) designed for musicians, producers, and sound engineers seeking a versatile platform for music production. This innovative software solutions suite combines user-friendly interfaces with powerful features and state-of-the-art technologies to create an exceptional audio experience.

At its core, the Woodstock W1738 prioritizes ease of use while maintaining high functionality. The intuitive layout accommodates users of all skill levels, from beginners to seasoned professionals. The main workspace is organized in a way that promotes efficiency, allowing users to access crucial tools and features easily. The software supports various audio formats, ensuring compatibility with a wide range of audio files and devices.

One of the standout features of the Woodstock W1738 is its advanced virtual instrument library. Offering a rich selection of synthesized sounds, acoustic instruments, and samples, it caters to various genres and styles. Users can easily integrate these instruments into their compositions, enhancing creativity and inspiration. Additionally, the library includes customizable effects that allow artists to shape their sounds uniquely.

The W1738 sets itself apart with its real-time collaboration capabilities. Musicians from different locations can work together seamlessly, sharing tracks, edits, and ideas instantly. This feature broadens the creative possibilities, enabling artists to collaborate in ways previously inconceivable.

In terms of audio editing, the Woodstock W1738 boasts powerful tools that include pitch correction, time stretching, and audio restoration. These technologies allow users to manipulate sound with precision, ensuring that every note and beat aligns perfectly with their vision. The software also includes a robust mixer with multitrack recording functionalities that make it easy to handle complex projects.

Furthermore, the integration of artificial intelligence features within the W1738 enhances user experience by providing automatic mixing suggestions, mastering presets, and intelligent sound analysis. These AI capabilities not only streamline the production process but also inspire users to explore new creative avenues.

The Woodstock W1738 embodies a commitment to high-quality audio resolution, supporting up to 32-bit/192 kHz audio fidelity. This ensures that the end result is nothing short of professional-grade quality, suitable for commercial release or personal enjoyment.

Overall, the Woodstock W1738 serves as a dynamic platform for audio production that combines innovative technology, ease of use, and collaborative features, making it an essential tool for modern musicians and producers seeking to express their creativity.