Woodstock W1738, W1737 owner manual Belt Tracking, Belt tracking adjustment

Page 24

W1737/W1738 Owner's Manual (Mfg. 10/09+)

Belt Tracking

OPERATIONS

The belt tracking knob and lever (Figure 26) stops the belt from tracking off of the drums and shutting down the machine. Your goal is to position the belt tracking lever so the belt tracks in the center of the drums and the left-and-right belt movement takes a similar amount of time.

Note: To fine-tune the left-and-right movement you will adjust Belt Oscillation Speed outlined on Page 23.

KEEP your hands clear of the sanding belt when making these adjustments!

To set the belt tracking, do these steps:

1.Complete the Jet Air Flow adjustment on Page 21.

2.Put on safety glasses, tie back all loose clothing, remove jewelry, pull back sleeves, and tie back long hair so it will not get caught by the sanding belt.

3.Turn the sander ON.

4.Observe the left-to-right motion of the belt as it moves along the drum while looking from the front of the sander.

—­ If the belt tracks faster to the right, but is slow to track back to the left, loosen the belt tracking knob and push it slightly to the left and retighten the knob. See Figure 26.

—­ If the belt tracks faster to the left, but is slow to track back to the right, loosen the belt tracking knob and push it slightly to the right and retighten the knob. See Figure 26.

5.Make sure the belt tracks left and right at approximately the same speed.

6.Keep the sander running, and now complete the

Belt Oscillation Speed adjustment as outlined on

Page 23.

Note: You may have to repeat the belt tracking adjustment after the Belt Oscillation Speed adjustment as both of these adjustment affect one another.

KEEP loose clothing and long hair secured and away from moving parts.

Belt Tracking

Knob and Lever

Figure 26. Belt tracking adjustment.

-22-

Page 23 Page 25
Image 24
Page 23 Page 25
Contents OWNERS MANUAL Grinding, drilling, and other construction activities Contents Service About Your New Sander Woodstock Technical SupportSpecifications W1737 and W1738 Independent Motor Control SystemControls and Features W1737/W1738 Standard Safety Instructions Disconnect machine when cleaning, adjusting or servicingKeep stable footing and balance at all times Additional Safety Instructions for Sanders Avoiding Potential Injuries Correct body and hand positioningPhase Converter Connection 220V/440V OperationDisconnect the sander from the power source 440V Conversion W1738Box Contents UnpackingMachine Placement Cleaning MachineAir Hose Installation Sanding Belt InstallationBreather Pin Dust CollectionControl Panel Sanding Load Amp MeterGeneral Operation Test RunTo complete the test run, do these steps Setting Feed Speed Using the Amp Draw MeterSelecting Sandpaper To change the feed belt speed do these stepsEmergency Stop Keypad and DisplayCalibrating the Table To use the emergency stop, do these stepsBasic Sanding TipTo sand a workpiece, do these steps Using the Platen Jet Air FlowComplete Belt Tracking on Belt tracking adjustment Belt TrackingBelt Oscillation Speed Oscillation systemGeneral LubricationCleaning Belts Maintaining Air SystemTable Stop Switches To adjust table stop switches, do these stepsBrake Service To check the condition of the brake pads, do these stepsRelieve the air pressure Remove the upper belt adjustment nut and washer Changing V-BeltsSanding motor V-belt Adjustment Tension Nut Belt TensionTo adjust the table parallelism, do these steps Table ParallelismTo adjust the feed belt tension and tracking, do these steps Feed Belt Tension TrackingBelt Tracking Safety Switch Belt Tension Safety SwitchBelt and pressure roller Adjustments Pressure RollersW1737 220V Single-Phase Motor Connection General Motor and Transformer ConnectionW1737 and W1738 Control Panel Wiring W1737 General Wiring Diagram W1738 General Wiring Diagram Connects To The T Terminal OnlyW1738 Electrical Box Component Locations Box Wiring Diagram W1737 Electrical Box Component Locations W1737 Electrical Electrical Parts W1738 440V Conversion Parts Tools and Cabinet Parts Sandpaper #180 Sanding Motor and Frame Parts Machine Frame Table Lift System Parts Electrical BOX W1738 Feed System and Conveyor Parts XPB16 Upper Roller System Parts Eccentric ROD Air System Parts Connector 1/4N X 1/8T Sanding Drum and Roller Parts PART
# Description Safety Label Placement Description Parts Troubleshooting Symptom Possible Cause How To RemedyWarranty Warranty Registration CommentsWoodstock international, inc. p.o. box Bellingham, wa Page High Quality Machines and Tools
Related manuals
Manual 68 pages 54.5 Kb

W1737, W1738 specifications

Woodstock W1738 is a cutting-edge digital audio workstation (DAW) designed for musicians, producers, and sound engineers seeking a versatile platform for music production. This innovative software solutions suite combines user-friendly interfaces with powerful features and state-of-the-art technologies to create an exceptional audio experience.

At its core, the Woodstock W1738 prioritizes ease of use while maintaining high functionality. The intuitive layout accommodates users of all skill levels, from beginners to seasoned professionals. The main workspace is organized in a way that promotes efficiency, allowing users to access crucial tools and features easily. The software supports various audio formats, ensuring compatibility with a wide range of audio files and devices.

One of the standout features of the Woodstock W1738 is its advanced virtual instrument library. Offering a rich selection of synthesized sounds, acoustic instruments, and samples, it caters to various genres and styles. Users can easily integrate these instruments into their compositions, enhancing creativity and inspiration. Additionally, the library includes customizable effects that allow artists to shape their sounds uniquely.

The W1738 sets itself apart with its real-time collaboration capabilities. Musicians from different locations can work together seamlessly, sharing tracks, edits, and ideas instantly. This feature broadens the creative possibilities, enabling artists to collaborate in ways previously inconceivable.

In terms of audio editing, the Woodstock W1738 boasts powerful tools that include pitch correction, time stretching, and audio restoration. These technologies allow users to manipulate sound with precision, ensuring that every note and beat aligns perfectly with their vision. The software also includes a robust mixer with multitrack recording functionalities that make it easy to handle complex projects.

Furthermore, the integration of artificial intelligence features within the W1738 enhances user experience by providing automatic mixing suggestions, mastering presets, and intelligent sound analysis. These AI capabilities not only streamline the production process but also inspire users to explore new creative avenues.

The Woodstock W1738 embodies a commitment to high-quality audio resolution, supporting up to 32-bit/192 kHz audio fidelity. This ensures that the end result is nothing short of professional-grade quality, suitable for commercial release or personal enjoyment.

Overall, the Woodstock W1738 serves as a dynamic platform for audio production that combines innovative technology, ease of use, and collaborative features, making it an essential tool for modern musicians and producers seeking to express their creativity.
Top Page Image Contents