Woodstock W1738, W1737 Changing V-Belts, Remove the upper belt adjustment nut and washer

Page 30

W1737/W1738 Owner's Manual (Mfg. 10/09+)

Changing V-Belts

Check the V-belts periodically to check for signs of glazing, cracking or fraying. If any of these conditions are present, change both V-belts.

Note: If the emergency stop system is used to stop the machine as a normal daily event, the breaking system and belts will prematurely wear and require replacement. When shutting down the machine under non-emergency conditions, use the red OFF push buttons.

To change the V-belts, do these steps:

1.TURN OFF and LOCK the master power switch so no power can go to your sander and shut OFF the air pressure!

2.Open both right-side upper and lower access panels.

3.Remove the screws and the safety cover for access to the upper pulley. See Figures 38 and 39.

4.Use a 14mm wrench and remove the upper caliper anchor pin retaining nut and washer. See Figure 40.

5.Use locking pliers to clamp on the anchor pin end, pull the pin from the caliper mount, and remove the springs. See Figure 40.

6.Pivot the caliper down and away from the rotor for belt clearance.

Safety

Cover

Figure 38. Safety cover and mounting

screws.

SERVICE

7.Remove the upper belt adjustment nut and washer

(Figure 40).

8.Pry the motor base plate upward to de-tension the belts, and roll the belts off of the motor pulley.

9.Install the new V-belts.

10.Replace the upper belt adjustment nut and washer, and tension the belt as necessary.

11.The V-belt is properly tensioned when it will move no more than 3⁄4" in the center with moderate pressure from your thumb. See V-Belt Tension on

Page 29 for details.

12.Reassemble in reverse order and test the emergency brake operation.

Figure 39. Upper pulley exposed.

 

Retaining

 

Nut

Rotor

 

Caliper

 

Assembly

 

Belt Adjustment Nut

Anchor

Pins

Figure 40. Belt removal access.

-28-

Page 29 Page 31
Image 30
Page 29 Page 31
Contents OWNERS MANUAL Grinding, drilling, and other construction activities Contents Service About Your New Sander Woodstock Technical SupportSpecifications W1737 and W1738 Independent Motor Control SystemControls and Features W1737/W1738 Standard Safety Instructions Disconnect machine when cleaning, adjusting or servicingKeep stable footing and balance at all times Additional Safety Instructions for Sanders Avoiding Potential Injuries Correct body and hand positioningPhase Converter Connection 220V/440V OperationDisconnect the sander from the power source 440V Conversion W1738Box Contents UnpackingMachine Placement Cleaning MachineAir Hose Installation Sanding Belt InstallationBreather Pin Dust CollectionControl Panel Sanding Load Amp MeterGeneral Operation Test RunTo complete the test run, do these steps Selecting Sandpaper Setting Feed SpeedUsing the Amp Draw Meter To change the feed belt speed do these stepsCalibrating the Table Emergency StopKeypad and Display To use the emergency stop, do these stepsBasic Sanding TipTo sand a workpiece, do these steps Using the Platen Jet Air FlowComplete Belt Tracking on Belt tracking adjustment Belt TrackingBelt Oscillation Speed Oscillation systemGeneral LubricationCleaning Belts Maintaining Air SystemTable Stop Switches To adjust table stop switches, do these stepsBrake Service To check the condition of the brake pads, do these stepsRelieve the air pressure Remove the upper belt adjustment nut and washer Changing V-BeltsSanding motor V-belt Adjustment Tension Nut Belt TensionTo adjust the table parallelism, do these steps Table ParallelismTo adjust the feed belt tension and tracking, do these steps Feed Belt Tension TrackingBelt Tracking Safety Switch Belt Tension Safety SwitchBelt and pressure roller Adjustments Pressure RollersW1737 220V Single-Phase Motor Connection General Motor and Transformer ConnectionW1737 and W1738 Control Panel Wiring W1737 General Wiring Diagram W1738 General Wiring Diagram Connects To The T Terminal OnlyW1738 Electrical Box Component Locations Box Wiring Diagram W1737 Electrical Box Component Locations W1737 Electrical Electrical Parts W1738 440V Conversion Parts Tools and Cabinet Parts Sandpaper #180 Sanding Motor and Frame Parts Machine Frame Table Lift System Parts Electrical BOX W1738 Feed System and Conveyor Parts XPB16 Upper Roller System Parts Eccentric ROD Air System Parts Connector 1/4N X 1/8T Sanding Drum and Roller Parts PART
# Description Safety Label Placement Description Parts Troubleshooting Symptom Possible Cause How To RemedyWarranty Warranty Registration CommentsWoodstock international, inc. p.o. box Bellingham, wa Page High Quality Machines and Tools
Related manuals
Manual 68 pages 54.5 Kb

W1737, W1738 specifications

Woodstock W1738 is a cutting-edge digital audio workstation (DAW) designed for musicians, producers, and sound engineers seeking a versatile platform for music production. This innovative software solutions suite combines user-friendly interfaces with powerful features and state-of-the-art technologies to create an exceptional audio experience.

At its core, the Woodstock W1738 prioritizes ease of use while maintaining high functionality. The intuitive layout accommodates users of all skill levels, from beginners to seasoned professionals. The main workspace is organized in a way that promotes efficiency, allowing users to access crucial tools and features easily. The software supports various audio formats, ensuring compatibility with a wide range of audio files and devices.

One of the standout features of the Woodstock W1738 is its advanced virtual instrument library. Offering a rich selection of synthesized sounds, acoustic instruments, and samples, it caters to various genres and styles. Users can easily integrate these instruments into their compositions, enhancing creativity and inspiration. Additionally, the library includes customizable effects that allow artists to shape their sounds uniquely.

The W1738 sets itself apart with its real-time collaboration capabilities. Musicians from different locations can work together seamlessly, sharing tracks, edits, and ideas instantly. This feature broadens the creative possibilities, enabling artists to collaborate in ways previously inconceivable.

In terms of audio editing, the Woodstock W1738 boasts powerful tools that include pitch correction, time stretching, and audio restoration. These technologies allow users to manipulate sound with precision, ensuring that every note and beat aligns perfectly with their vision. The software also includes a robust mixer with multitrack recording functionalities that make it easy to handle complex projects.

Furthermore, the integration of artificial intelligence features within the W1738 enhances user experience by providing automatic mixing suggestions, mastering presets, and intelligent sound analysis. These AI capabilities not only streamline the production process but also inspire users to explore new creative avenues.

The Woodstock W1738 embodies a commitment to high-quality audio resolution, supporting up to 32-bit/192 kHz audio fidelity. This ensures that the end result is nothing short of professional-grade quality, suitable for commercial release or personal enjoyment.

Overall, the Woodstock W1738 serves as a dynamic platform for audio production that combines innovative technology, ease of use, and collaborative features, making it an essential tool for modern musicians and producers seeking to express their creativity.
Top Page Image Contents