ASSEMBLY
Overview
The following is a description of the components shipped with the SHOP FOX® W1708 12" Disc Sander.
Should any parts be missing, examine the packaging carefully to be sure parts are not among the packing materials. If any parts are missing, contact Woodstock International, Inc. at
Box Contents
1.Disc Sander
2.Miter Gauge
3.Sanding Disc
1
3
2
Figure 3. Disc sander components.
!DO NOT connect the machine to power at this time. The machine must
remain unplugged throughout the entire assembly process. Failure to do this may result in serious personal injury.
Shop Preparation
•Workbench Load: Your disc sander has a small weight load in a small footprint. Most workbenches are suitable for the disc sander. Reinforce the workbench if you question its ability to support the disc sander.
•Working Clearances: Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your disc sander.
•Lighting and Outlets: Lighting should be bright enough to eliminate shadows and prevent eye strain. Electrical circuits should be dedicated or large enough to handle amperage requirements. Outlets should be located near each machine so power or extension cords are clear of
ALWAYS make sure that all entrances to your shop are locked or that machines are equipped with safety
ASSEMBLY