| Model W1828 (For Machines Mfg. Since 4/11) |
Machine Placement | Cleaning Machine |
•Workbench Load: This machine distributes a heavy load in a small footprint. Some workbenches may require additional bracing to support both machine and workpiece.
•Working Clearances: Consider existing and anticipated needs, size of material to be processed through the machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your sander (see Figure 4).
•Lighting: Lighting should be bright enough to eliminate shadow and prevent eye strain.
|
| 18" |
SETUP |
| Duct |
3" Air |
| |
|
| |
| Gap | 171/4" |
| Min. | |
|
|
Figure 4. Working clearances.
MAKE your shop “child safe.” Ensure that your workplace is inaccessible to children by closing and locking all entrances when you are away. NEVER allow untrained visitors in your shop when assembling, adjusting or operating equipment.
The table and other unpainted parts of your disc sander are coated with a waxy grease that protects them from corrosion during shipment. Clean this grease off with a solvent cleaner or
NEVER clean with gasoline or other petroleum- based solvents. Most have low flash points, which make them extremely flammable. A risk of explosion and burning exists if these products are used. Serious personal injury may occur if this warning is ignored!
ALWAYS work in well- ventilated areas far from possible ignition sources when using solvents to clean machinery. Many solvents are toxic when inhaled or ingested. Use care when disposing of waste rags and towels to be sure they DO NOT create fire or environmental hazards.