Woodstock owner manual Model W1828 For Machines Mfg. Since 4/11

Page 6

INTRODUCTION

	Model W1828 (For Machines Mfg. Since 4/11)



Product Dimensions
Weight	68 lbs.
Width (side-to-side) x Depth (front-to-back) x Height	18 x 17-3/8 x 14-1/2 in.
Footprint (Length x Width)	13 x 10 in.
Shipping Dimensions
Type	Cardboard
Content	Machine
Weight	74 lbs.
Length x Width x Height	18 x 18 x 17 in.
Electrical
Power Requirement	110V, Single-Phase, 60 Hz
Full-Load Current Rating	7.5A
Minimum Circuit Size	15A
Switch	Paddle Switch w/Disabling Key
Switch Voltage	110V
Cord Length	5 ft.
Cord Gauge	16 Gauge
Plug Included	Yes
Included Plug Type	NEMA 5-15
Other
Country Of Origin	China
Warranty	2 Year
Assembly Time	5 Minutes
Features
Locking Miter Bar
Built-In Dust Port
Non-Slip Rubber Feet

-4-

Image 6

Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportShop FOX 12 Disc Sander Model W1828 For Machines Mfg. Since 4/11 Controls and Features Work Table Rubber FootSafety For Your Own Safety Read Manual Before Operating MachineStandard Machinery Safety Instructions Safety Additional Safety for Disc Sanders 60 Hz Electrical110V/120V AmpsGrounding & Plug Requirements 50 ftUnpacking SetupNeeded for Setup InventoryMachine Placement Cleaning Machine Working clearancesBench Mounting Dust CollectionPower Connection Power sourceProjectiles thrown from this machine Safety glasses to reduce the riskTest Run Could cause serious eye injury. WearOperations GeneralBasic Controls Disabling ON/OFF Switch Operation OverviewGrit Type Choosing SandpaperStock Inspection Requirements Before sanding, inspect all workpieces for the followingAttaching Sandpaper To attach the sandpaper disc, do these stepsDisconnect Sander from Power Disc SandingModel Grit AccessoriesDisc Sander Accessories Size ModelTable & Base MaintenanceCleaning LubricationTools Needed ServiceTable/Disc Parallelism To make the table and sanding disc parallel, do these stepsTo calibrate the miter gauge, do these steps Miter Gauge CalibrationTable Tilt Calibration Against the disc face, as shown in FigureTroubleshooting Problem Possible CauseInstall a coarse grit sandpaper, or strip coating off Electrical Safety Instructions Wiring Diagram Color KEYWiring Diagram Stop22-3 22-1 22-5 22-4 22-2 16-1 Main Parts List DescriptionPage Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools