Woodstock M1013 manual Glcc\pfm\i

D('(*Fne\ijDXelXcD]^%J`eZ\-&'0

Glcc\p:fm\i

When opened, the pulley cover gives you access to change the pulley ratio so the bandsaw can cut at one of three speeds.

<EK8E>C<D<EK?8Q8I; D8B< JLI< k_\ YXe[jXn `j legcl^^\[ Y\]fi\ gifZ\\[`e^ Fk_\in`j\# j\m\i\ `ealip dXp fZZli%

Kf`ejkXcck_\glcc\pZfm\i#[fk_\j\jk\gj1

(% Position and rotate the pulley cover into place, as shown in =`^li\(-.

)% Install the two 1⁄4-20 x 1⁄2" hex bolts and washers to secure the pulley cover.

*% Loosen the belt tension knob enough to install the belt on the appropriate pulley that will give the required blade speed. Refer to 9cX[\Jg\\[ on GX^\ )* for blade speed selections.

+% Adjust the belt tension knob (=`^li\(.), so the belt has approximately 1⁄4" deflection when pressed in between the pulleys, then close and secure the cover.

=`^li\(-%Positioning the pulley cover.

Belt Tension

Knob

=`^li\(.% Belt tension knob.

J<KLG

-17-