J<KLG
9cX[\K\ej`fe
Proper blade tension is essential to long blade life, straight cuts, and efficient cutting.
Two major signs that you do not have proper blade tension are: 1) the blade stalls in the cut and slips on the wheels, and 2) the blade frequently breaks from being too tight.
;`jZfee\Zk YXe[jXn ]ifd gfn\i 9<=FI< dXb`e^ Xe[ X[aljkd\ekj kfk_\dXZ_`e\
Kfj\kk_\YcX[\k\ej`fe#[fk_\j\jk\gj1
(% Make sure the blade is tracking properly (refer to 9cX[\KiXZb`e^ on GX^\)0 for detailed instructions).
)% Remove the cylinder lock pin, raise the headstock to the full vertical position, and push the safety stop inward to lock the headstock in the vertical position (see =`^li\(/ .
*% Open the blade cover, as shown in =`^li\(0#slide the blade guides as far apart as possible, then secure them in place
Cylinder |
Lock Pin |
Safety |
Stop |
=`^li\(/%Raising and locking headstock.
Blade
Tension
Knob
+% Turn the blade tension knob until the blade is snug, | =`^li\(0%Blade tension adjustment knob. | ||
and the blade tension scale indicates "medium" (see |
|
|
|
=`^li\)'). |
|
|
|
|
|
| |
|
|
|
|
,% Adjust the blade guides as instructed in the next |
| Blade Tension Scale |
|
subsection |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
=`^li\)'% Typical blade tension scale.