Woodstock W1679 instruction manual Parts

Page 34

CLOSURE

The following pages contain parts diagrams/lists and a warranty card for your Shop Fox® Model W1679.

If you need parts or help in assembling your machine, or if you need operational informa- tion, we encourage you to call our Service Department. Our trained service technicians will be glad to help you.

If you have comments dealing specifically with this manual, please write to us using the address in the General Information. The specifications, drawings, and photographs illustrated in this manual represent the Model W1679 as supplied when the manual was prepared. However, due to Woodstock International, Inc.’s policy of con- tinuous improvement, changes may be made at any time with no obligation on the part of Woodstock International, Inc.

We have included some important safety mea- sures that are essential to this machine’s opera- tion. While most safety measures are generally universal, we remind you that each workshop is different and safety rules should be considered as they apply to your specific situation.

Use the tool with respect and caution to lessen the possibility of mechanical damage or operator injury. As with all power tools, there is danger associated with the Model W1679. If normal safety precautions are overlooked or ignored, injury to the opera- tor or others in the area is likely.

We recommend you keep this manual for com- plete information regarding Woodstock International, Inc.’s warranty and return policy. Should a problem arise, we recommend that you keep your proof of purchase with your manual. If you need additional technical information relating to this machine, or if you need general assistance or replacement parts, please contact the Service Department at 1-360-734-3482 or e- mail: tech-support@woodstockint.com.

Additional information sources are necessary to realize the full potential of this machine. Trade journals, woodworking magazines, and your local library are good places to start.

The Model W1679 is specifically designed for wood cutting operations. DO NOT MODIFY

AND/OR USE THIS MACHINE FOR ANY OTHER PURPOSE. MODIFICATIONS OR IMPROPER USE OF THIS TOOL WILL VOID THE WARRANTY. If you are confused about any aspect of this machine, DO NOT use it until all your questions have been answered.

Always wear safety glasses or goggles when operating equipment. Operating this equip- ment creates the potential for flying debris to cause eye injury. Everyday glasses or reading glasses only have impact resistant lenses, they are not safety glasses. Be cer- tain the safety glasses you wear meet the appropriate standards of the American National Standards Institute (ANSI).

PARTS

-32-

Image 34
Contents Jointer Page Table Of Contents Introduction Woodstock Service And SupportAbout Your New Jointer Warranty And Returns Machine SpecificationsSafety Standard Safety Instructions#18 #16 #14 11-12 13-16 #12 17-20 #10 21-30 Keep your footing stable and keep your balance at all timesAdditional Safety Instructions For Jointers Avoiding Potential Injuries Never surface plane without push blocksExtension Cords 110V OperationGrounding 220V Operation NEMA-style 6-15 plug and outletBox Contents Assembly InstructionsUnpacking Shop Preparation Cleaning Machine Beginning Installing V-BeltMounting Jointer Installing Fence Dust PortInstalling lock knob and special nut Pivot Cutterhead GuardControl Pedestal Belt GuardKnife Gauge To assemble the knife gaugeAdjustments Checking KnivesAdjusting Knives To adjust the knives Unplug the jointerTo adjust the outfeed table Unplug the jointer Adjusting TablesTo adjust the table gibs Unplug the jointer Table GibsTo adjust the infeed table Infeed table even with outfeed Scale can now be set toTo check/adjust the fence stops Unplug the jointer Fence StopsStarting Jointer OperationsBasic Operations Only plane clean stock Operation MustsSurface Planing To perform a surface planing operationEdge Jointing To perform an edge jointing operationBevel Cutting To perform a bevel cutting operationRabbet Cutting To perform a rabbet cutting operationGeneral MaintenanceTable Surface Replacing V-Belt LubricationSharpening Knives To replace the V-belt Unplug the jointerTroubleshooting Symptom Possible Reason HOW to RemedyFeed Direction Maintenance Parts Parts 120 112 119 104 132 103 130 XPW07 Flat Washer 5⁄16 XPB21 208 242 243 232 209 221 213 229 226 316 Infeed Table Warranty Card BOX BELLINGHAM, WA