SAFETY INSTRUCTIONS
Safety Information for the Installer
WARNING
Turn off the power at the mains switchboard before beginning the installation.
Post a sign near the switch to indicate it should not be turned on while the equipment is being installed.
Fire or electrical shock can result if the power is left on or is applied while the equipment is being installed.
CAUTION
Confirm that the power supply voltage is compatible with the voltage rating of the equipment.
Connection to the wrong power supply can cause fire or equipment damage.
Use the supplied power cable.
Use of a wrong power cable can cause fire or equipment damage.
Maintain the compass safe distance.
Standard compass | Steering compass |
|
|
0.5 m | 0.4 m |
|
|
Safety Information for the Operator
WARNING
Do not disassemble or modify the equipment.
Fire, electrical shock or serious injury can result.
Turn off the power immediately if water leaks into the equipment or the equipment is emitting smoke or fire.
Continued use of the equipment can cause fire or electrical shock.
Do not place
Fire or electrical shock can result if a liquid spills into the equipment.
CAUTION
Turns off the autopilot before selecting output data format.
The autopilot may turn the rudder suddenly.
Turns off the autopilot before aligning heading.
The autopilot may turn the rudder suddenly.
i