Furuno PG-1000 manual Table of Contents

Page 5

TABLE OF CONTENTS

SYSTEM CONFIGURATION

iv

SPECIFICATIONS

SP-1

1 INSTALLATION
1.1	Equipment List	1
1.2	Selecting Mounting Location	2
1.3	Mounting	3
1.4	Connections	4
1.5	Correcting Magnetic Field Distortion (Deviation)	5
1.6	Heading Alignment	6
1.7	Setting Output Data	6
2 CORRECTING MAGNETIC ANOMALIES
2.1	Controls and Indications	8
2.2 Turning the Power On/Off		8
2.3 Automatic Distortion Compensation		9
2.4	Selecting Output Data Format	9
3 MAINTENANCE & TROUBLESHOTTING
3.1	Maintenance	10
3.2 Troubleshooting		10
3.3	Diagnostic Test	11
3.4	Displaying Program Version No	12
PARTS LOCATION AND LIST		AP-1
OUTLINE DRAWING		D-1
SCHMATIC DIAGRAM		S-1

iii

Image 5

Contents Integrated Heading Sensor First Edition JUL Safety Instructions Word to PG-1000 Owners FeaturesForeword Table of Contents Nmea System ConfigurationSpecifications of Integrated Heading Sensor Installation materials CP64-02000 InstallationEquipment List Standard setSelecting Mounting Location Connect the PG-1000 to the battery as shown in rightPress the Auto and + keys together more than two seconds MountingChecking for inclination ConnectionsGrounding Connection of external equipmentLED status at successful Correction Correcting Magnetic Field Distortion DeviationSetting output interval Setting Output DataHeading Alignment Key. For example, the hading output byPress the + or key to change interval Setting the output sentencesTurn the mains switch on Controls and Indications Turning the Power On/OffCorrecting Magnetic Anomalies Status LED blinks. About two minutesConnect Furuno GPS Navigator to PG Automatic Distortion CompensationSelecting Output Data Format Troubleshooting Maintenance & TroubleshootingMaintenance When the equipment finds error, LEDs do not light Diagnostic testLED/KEY/ROM/RAM test + keyLED state Program version no Displaying Program Version NoParts Location and List Page