Furuno PG-1000 manual Maintenance & Troubleshooting

Page 17

3MAINTENANCE & TROUBLESHOOTING

3.1Maintenance

Regular maintenance is important to maintain intended performance over a long period. Regularly check the following:

•Clean the component with a soft cloth. Do not use chemical cleaners; they can remove paint and markings.

•Make sure all connections are tight.

•Check the ground terminal for corrosion. Clean if necessary.

3.2Troubleshooting

The table below provides simple troubleshooting procedures which the user can follow to re- store normal operation. If normal operation cannot be restored do not check inside the equip- ment; there are no user-serviceable parts inside. Any repair work should be referred to a qualified technician.

Symptom		Remedy

Unit cannot be powered.	•	Check power connector.
	• Check the ship's mains.

LEDs do not light.	•	Check power connector.
	• Do the diagnostic test.
		(Refer to the next page.)

Heading data error.	•	Do the self-test.
		(Refer to the next page.)

The heading data is not output to	•	Check connections.
external equipment.	• Do the diagnostic test.
		(Refer to the next page.)

10

Image 17

Contents Integrated Heading Sensor First Edition JUL Safety Instructions Word to PG-1000 Owners FeaturesForeword Table of Contents Nmea System ConfigurationSpecifications of Integrated Heading Sensor Installation materials CP64-02000 InstallationEquipment List Standard setSelecting Mounting Location Connect the PG-1000 to the battery as shown in rightPress the Auto and + keys together more than two seconds MountingChecking for inclination ConnectionsGrounding Connection of external equipmentLED status at successful Correction Correcting Magnetic Field Distortion DeviationSetting output interval Setting Output DataHeading Alignment Key. For example, the hading output byPress the + or key to change interval Setting the output sentencesTurn the mains switch on Controls and Indications Turning the Power On/OffCorrecting Magnetic Anomalies Status LED blinks. About two minutesConnect Furuno GPS Navigator to PG Automatic Distortion CompensationSelecting Output Data Format Troubleshooting Maintenance & TroubleshootingMaintenance When the equipment finds error, LEDs do not light Diagnostic testLED/KEY/ROM/RAM test + keyLED state Program version no Displaying Program Version NoParts Location and List Page