FEATURES
KNOW YOUR AIR COMPRESSOR
See Figure 2.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
A
DRAIN VALVES
A drain valve is located on each tank for draining condensa- tion to help prevent tank corrosion.
HANDLE
The handle of your air compressor lifts up for use and folds down for storage or transportation.
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of air being delivered through the hose. Pressing down on the knob will lock it into place. This prevents movement of the knob caused by vibration during use.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator pres- sure gauge. This pressure can be adjusted by rotating the pressure regulator knob.
SAFETY VALVE
The safety valve is designed to automatically release air if the air receiver pressure exceeds the preset maximum.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air in the tank.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the air compressor and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the air compressor carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Air Compressor
Oil Dipstick
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
INSTALLING THE DIPSTICK
See Figure 3.
To prevent oil from spilling during shipping, the air compres- sor has a plug installed in the oil fill hole. Before using the unit the first time, replace the plug with the oil fill dipstick and check the oil level.
nRemove the plug from the oil fill hole.
nInsert the dipstick into the oil fill hole.
nRemove the dipstick and check the oil level, making sure the oil registers between the MIN and MAX reference lev- els on the dipstick. If the level does not register between those areas, refer to Checking the Oil in the Operation section of this manual.
nReplace the dipstick.
OIL PLUG
DIPSTICK 
OIL FILL
HOLE
Fig. 3
10