Heat & Glo LifeStyle AT-GRAND manual Glass Assembly, Placement of the Ember Material

15

1.Lift the top trim door up and out of the unit.

2.Pull out and rotate the glass release eye bolts at the top and bottom edges and remove the glass door from the unit.

1.Place the ember material onto the top of the burner.

•Remove the glass door from the unit.

•Cover the top of the burner with a single layer of ember material. Then sprinkle GE-93 on top of the burner.

•Save the remaining ember materials for use during fireplace servicing.

•Replace the glass door.

•Reset the four glass eye bolts, be sure they are securely latched.

•Replace the trim door.

GLASS DOOR

Figure 10. Glass Assembly

Figure 11. Placement of the Ember Material