SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | DESIGNATION/EXPLANATION |
V | Volts | Voltage |
A | Amperes | Current |
Hz | Hertz | Frequency (cycles per second) |
| Alternating Current | Type of current |
| Class II Construction | |
| Wet Conditions Alert | Do not expose to rain or use in damp locations. |
| Read The Operator’s Manual | To reduce the risk of injury, user must read and understand |
| operator’s manual before using this product. | |
|
| |
| Eye Protection | Always wear safety goggles, safety glasses with side shields, or |
| a full face shield when operating this product. | |
|
| |
| Safety Alert | Precautions that involve your safety. |
|
| Do not adjust regulator to result in output pressure greater than |
| Risk of Bursting | marked maximum pressure of attachment. Do not use at pressure |
|
| greater than 135 PSI. |
|
| Do not spray flammable liquid in a confined area. Spray area |
| Risk of Fire or Explosion | must be well ventilated. Do not smoke while spraying or spray |
| where spark or flame is present. Keep compressors as far from | |
|
| the spraying area as possible, at least 15 feet from the spraying |
|
| area and all explosive vapors. |
| Risk of Electrical Shock | Hazardous Voltage: Disconnect from power source before servic- |
| ing. Compressor must be grounded. | |
|
| |
| Hot Surface | To reduce the risk of injury or damage, avoid contact with any |
| hot surface. | |
|
| |
| Risk to Breathing | Air obtained directly from the air compressor should never be |
| used to supply air for human consumption. | |
|
| |
| Pinch Point | To reduce the risk of injury or damage, avoid contact with |
| any pinch point. | |
|
|
5