Character Spacing | Narrow | Narrow |
|
|
|
Block Length | Auto | Auto |
|
|
|
Mirror Printing | Normal | Normal |
|
|
|
Proportional Spacing | On | On |
|
|
|
Smoothing | On | On |
|
|
|
Block Spacing | Narrow | Narrow |
|
|
|
Auto Feed | Long | Long |
|
|
|
Tape Length | Auto | Auto |
|
|
|
Block Alignment | ****(Left) | ****(Left) |
|
|
|
Default Font | Retained | |
|
|
|
Insert/Overwrite | Retained | Insert |
|
|
|
Contrast (32 levels) | Retained | Level 17 |
Item | Power On | Reset |
|
|
|
Density (5 levels) | Retained | Level 3 |
|
|
|
Sound | Retained | On |
|
|
|
Language | Retained | English |
cm/inch | Retained | cm |
Initializing the Label Printer
If you experience serious malfunction of the label printer or if operation fails completely, try performing the following operation to initialize the printer.
Important! Initializing the label printer deletes all memory contents. Make sure you have a
To initialize the label printer
1.Turn power off.
2.Holding down the PRINT, ESC, and ON keys, turn power back on.
•This prompt confirms whether or not you want to initialize the label printer. 3. Press SET to initialize the label printer or ESC to abort the reset operation.
Format Indicator
The following shows how the brackets on either side of the format indicator change to indicate various conditions.
[■]: Fixed block length (specified by user)
(■]: | Block text too long for fixed block length, but printing will be performed by compressing text. |
■]: | Printed tape length will be longer than specified fixed length because text will not fit within fixed tape length even if its size is reduced 50%. |
Tape Length Indicator
The following shows how the brackets on either side of the tape length indicator change to indicate various conditions.
[5.1cm]: Fixed tape length specified by user. 5.1cm]: Printing operation cannot be performed.
Illustrations
Symbols, Dingbats, and Special Characters
●SYMBOL
