RIDGID OL50135W manual Table of Contents, Introduction

Page 2

TABLE OF CONTENTS

 

n Introduction

2

n General Safety Rules

3-4

n Specific Safety Rules

4

n Symbols

5-6

��n Electrical

7

��n Glossary of Terms

8

��n Features

9-10

��n Assembly

10-11

n Operation

12-15

n Maintenance

16-17

n Troubleshooting

18-19

n Warranty

21

n Customer Service Information

22

INTRODUCTION

 

This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

DANGER:

This compressor/pump is not equipped and should not be used to supply breathing quality air. Additional equip- ment would be necessary to properly filter and purify the air to meet minimal specifications for Grade D breathing as described in Compressed Gas Association Commodity Specification G 7.1 - 1966, OSHA 29 CFR 1910.134. Compressed Gas Association, 4221 Walney Road, Fifth Floor, Chantilly, VA 20151-2923, (703) 788-2700, www.cganet.com. Any such additional equipment has not been examined and no implication of proper use for breathing air is intended or implied.

If this compressor is altered in any way, existing warranties shall be voided. RIDGID and One World Technologies, Inc. disclaim any liabilities whatsoever for any loss, personal injury, or damage.

DISCLAIMER OF WARRANTIES

In the event the compressor is used for the purpose of breathing air application and proper in-line safety and alarm equipment is not simultaneously used, existing warranties shall be voided, and RIDGID disclaims any liabilities whatsoever for any loss, personal injury, or damage.

2

Image 2
Contents OPERATOR’S Manual OIL Lubricated Direct DriveTable of Contents IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaSpecific Safety Rules ServiceSymbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Extension Cords Speed and WiringElectrical Grounding InstructionsScfm Glossary of TermsNPT Handle BUILT-IN Cord Safety Wrap Valve FeaturesProduct Specifications Assembly Attaching a Hose Drain Valves Switch HoseBreaking in the Pump See Figures 4RAISING/LOWERING the Handle OperationApplications Handle Release Knob BUILT-IN Cord WrapOIL Dipstick OIL Fill Hole Checking the OILSee Figures 8 See Figures 10 Using the AIR CompressorCold Weather Starting Draining the Tanks Checking the Safety ValveTank Drain Valves Safety To drainReplacing the AIR Filter MaintenanceGeneral Maintenance Wheel Spacer HEX NUT Changing the OILSee Figures 15 OIL Fill Hole Drain Plug HEX KEYTroubleshooting Problem Cause SolutionTroubleshooting Page Warranty Customer Service Information Model No OL50135W Serial No