RIDGID R4121 manual Service, Symbol Signal Meaning

Page 7

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will

 

result in death or serious injury.

 

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could

 

result in death or serious injury.

 

 

 

 

 

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may

 

result in minor or moderate injury.

 

 

 

 

 

 

 

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in

 

property damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and un- derstand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call RIDGID® customer service for assistance.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OPERATOR’S Manual Introduction Table of ContentsRead ALL Instructions General Safety Rules Blade Coasts After Being Turned OFF  Before Making a CUT, be Sure ALL ADJUST- Ments are Secure Specific Safety RulesSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Cord Length Wire Size A.W.GElectrical Double InsulationGlossary of Terms Scale FeaturesProduct Specifications MiterBlade Wrench Storage Know Your Compound Miter SAW12 IN. Blade AMP MotorSliding Miter Fences Switch TriggerREPEAT-A-CUT SELF-RETRACTING Lower Blade GuardCombination WRENCH, 12 mm Tools NeededPhillips Screwdriver Combination Square Framing Square HEX KEY, 1/16 Installed on ToolLoose Parts Blade Washer Bolt Work Clamp Dust BAG HEX KEYTrace Holes AssemblyUnpacking Mounting HolesDust BAG Installing the Work ClampTo install the work clamp Dust GuideBlade Laser Guide Loosen Tighten Installing the BladeTighten Securely To Prevent Guard Movement BladeAligning the Laser Guide Line Cutting a Slot in the Zero Clearance Throat PlateBroken Line Miter Lock Lever Lift to Unlock Push Down to Lock Adjusting the Miter Lock LeverTo adjust Squaring the SAW Blade to the FenceView of Blade Square with Fence Push Back To Lock Bevel Adjusting the Bevel Lock LeverAdjusting the Bevel Pivot Travel Pivot AdjustmentCorrect View of Blade Squaring the Blade to the Miter TableSee Figures 24 Blade Bevel Lock LeverApplications OperationCutting with Your Compound Miter SAW See Figures 28 To bypass preset index pointsTo Miter CUT / Cross CUT To align with miter scaleBevel Scale Stop PIN Bevel CUT Clamp To Bevel CUTSee Figures 30 Bevel LockCompound Miter CUT To Compound Miter CUTLong Workpiece Supporting Long WorkpiecesClamping Wide Workpieces 45 x 45 Compound Miter CUTTo attach the auxiliary fence to the saw Making AN Auxiliary FenceAuxiliary Fence Cutting Compound Miters COMPOUND-ANGLE Settings for Popular Structures38˚/52˚ 45˚/45˚ Cutting Crown Molding38˚ / 52˚ 45˚/45˚ Angle Miter / Bevel MITER/BEVELCeiling Laying Molding Flat on the Miter TableInside Corner Fence Making a Crown Molding JIG Using a Crown Molding JIGCrown Molding JIG Right Cutting Warped MaterialSee Figures 40 WrongGeneral Maintenance AdjustmentsMaintenance To Adjust the Laser GuideProceed as follows when replacement is required Brush ReplacementChanging the Batteries Checking Motor Belt Tension and Replacing the Belt AccessoriesHOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyModel No R4121 Serial No Customer Service Information

R4121 specifications

The RIDGID R4121 is a powerful and versatile table saw that has made a significant impact in the woodworking and construction industries. This innovative tool is designed to meet the needs of both professional contractors and DIY enthusiasts, offering a blend of performance, precision, and portability.

One of the standout features of the R4121 is its robust 15-amp motor, which provides ample power to handle a wide range of cutting tasks. This motor delivers a no-load speed of 5,000 RPM, allowing users to rip through hardwoods, softwoods, and composite materials with ease. The saw's 10-inch blade gives users the ability to make clean, straight cuts, while the adjustable blade height and angle settings enable bevel cuts and varied depths for more complex woodworking projects.

Portability is a key characteristic of the RIDGID R4121. With its compact design and lightweight construction, it can be easily transported to job sites or moved around the workshop. The saw features a sturdy folding stand that can be set up quickly, providing stability while saving valuable space when not in use. This makes it an ideal choice for those who need a dependable table saw that doesn’t sacrifice performance for portability.

In terms of safety, the R4121 is equipped with an array of features designed to protect users during operation. It includes a blade guard for added protection, an anti-kickback pawl for preventing kickbacks, and an emergency stop switch for quick shutdown in case of an unexpected emergency. These safety features enhance user confidence, making it a smart choice for both novice and experienced woodworkers.

The Ridgid R4121 also incorporates advanced technologies to enhance usability and precision. The rack and pinion fence system ensures accurate and consistent cuts, allowing users to make easy adjustments for various workpieces. Additionally, the miter gauge included with the saw provides added versatility for cross-cutting and angled cuts, making it suitable for a diverse array of projects.

Overall, the RIDGID R4121 is a well-rounded table saw that excels in performance, safety, and convenience. Whether you’re tackling home improvement tasks or working on larger construction projects, this tool is designed to deliver reliability and professional-grade results, making it a valuable addition to any workshop. With its combination of power, portability, and precision, the R4121 is poised to become a favorite among users who demand quality and performance in their woodworking tools.
Top Page Image Contents