EN | Continuous laser ( | ) |
You can switch the continuous laser function on or off.
With the continuous laser function set on, each press of the 
button triggers a measurement. The laser automatically switches off after 15 minutes.
Measuring with the tripod ( TRIPOD )
The reference must be appropriately adjusted in order to be able to take correct measurements with a tripod. To do this select the TRIPOD symbol in this menu item. You can switch the reference on the tripod on or off. The setting can be seen on the display 
.
Display - keypad illumination (
)
Automatic illumination of the display and the keypad can be switched on or off.
A reset returns the following values to their factory settings:
•Reference (rear)
•Display illumination (ON)
•Beep (ON)
•Unit (m(mm))
•Stack and memory are erased
)All customised settings and stored values are also lost.
Operation
Switching on and off
Switches on the instrument and laser. The display shows the battery symbol until the next button is pressed.
Pressing this button for longer switches the instrument off.
The instrument switches off automatically after 6 minutes of inactivity.
Reset - returning the instrument to | CLEAR button | |
the factory settings ( | ) | The last action is cancelled. While making area or |
The instrument has a RESET function. When you | volume measurements, each single measurement can | |
select the menu function RESET and confirm, the | be deleted and remeasured in series. | |
instrument defaults to the factory settings. |
| |
Operation
8
Leica DISTO™ D3 760498a en