Leica 760498a manual Start-up, Labelling, Inserting/replacing batteries, Multifunctional endpiece

Labelling

Laser Radiation

Do not stare into the beam

Laser class 2

acc. IEC 60825-1:2007

Maximum radiant power:	<1mW
Emitted wavelength: 620-690nm

Beam divergence: 0.16 x 0.6 mrad
Pulse duration:	1 x 10 -9s

Position of the product label see last page!

Start-up EN

Inserting/replacing batteries

See figure {A}

1Remove battery compartment lid and attach handstrap.

2Insert batteries, observing correct polarity.

3Close the battery compartment again. Replace the batteries when the symbol flashes perma- nently in the display.

)	Use alkaline batteries only.
)	Remove the batteries before any long period

of non-use to avoid the danger of corrosion.

Multifunctional endpiece

See figure {B}

The instrument can be adapted for the following measuring situations:

•For measurements from an edge, fold out the positioning bracket until it first locks in place. See figure {C}.

•For measurements from a corner, open the posi- tioning bracket until it locks in place, then push the positioning bracket lightly to the right to fold it out fully. See figure {D}.

Leica DISTO™ D3 760498a en

5

Start-up