EN |
Storage of constants/historical storage
Storage of a constant
You can store and recall a frequently used value e.g. height of a room. Measure the desired distance, press and hold the 
button until the device beeps to confirm storage.
Recalling the constant
Press this button once to recall the constant and make it available for further calculations by pressing button 
.
Historical storage
Press this button twice and the previous 20 results (measurements or calculated results) are shown in reverse order.
The 
and 
buttons can be used for navigation.
Press this button to use a result from the summary line for further calculations.
Pressing the 
and 
buttons at the same time erases all the values in historical storage.
Timer (self-triggering)
Press this button to set a
Press and hold down this button until the desired time delay is reached (max. 60 seconds).
Once the key is released the remaining seconds until measurement (e.g. 59, 58, 57...) are displayed in a countdown. The last 5 seconds are counted down with a beep. After the last beep the measurement is taken and the value is displayed.
)The timer can be used for all measurements.
Functions | 14 | Leica DISTO™ D3 760498a en |