EN |
Functions
Addition / subtraction
Distance measuring.
The next measurement is added to the previous one.
The next measurement is subtracted from the previous one.
This process can be repeated as required. The result is always shown in the summary line with the previous value in the second line.
The last step is cancelled.
appears in the display.
Press this button to take the first length measurement (e.g. length).
Press this button to take the second length measurement (e.g. width).
Press this button to take the third length measurement (e.g. height). The value is shown in the second line.
The volume then appears in the summary line. Press the 
button for longer to display additional room information such as ceiling/floor area, surface area of the walls, circumference.
Area
Press once. The 
symbol appears in the display.
Press this button to take the first length measurement (e.g. length).
Press it again to take the second length measurement (e.g. width).
The result is displayed in the summary line. Press the 
button for longer to calculate the circumference.
Tilt measurement
)The inclination sensor measures tilts between
± 45°.
)During tilt measurement the instrument should be hold without a transverse tilt (± 10°).
Press this button once to activate the tilt sensor. The 
symbol appears in the display. The tilt is continuously shown as ° or % depending on the
setting.
Press to measure the inclination and the distance. See figure {J}.
Volume
|
| Press this button twice. The |
| symbol |
| |
|
|
|
| |||
|
|
|
|
|
|
|
Functions |
|
| 10 | Leica DISTO™ D3 760498a en | ||