Direct horizontal distance
Press this button twice and the following symbol appears in the display 
.
Press this button to measure tilt and distance. The summary line displays the result as the direct horizontal distance.
Room corner angle function
The angles in a triangle can be calculated by measuring the three sides. This function can be used e. g. to check a
Press this button three times and the room corner symbol appears in the display 
.
Mark the reference points to the right and left (d1/ d2) of the angle to be measured.
Press this button to measure the first (short) side of the triangle (d1 or d2).
Press this button to measure the second (short) side of the triangle (d1 or d2).
Press this button to measure the third (long) side of the triangle (d3).
The result is displayed in the summary line as the room corner angle.
Stake out function
Two different distances (a and b) can be entered into the instrument and can then be used to mark off defined measured lengths, e.g. in the construction of wooden frames.
See figure {L}.
Entering stake out distances:
Press this button four times and the stake out function symbol appears in the display 
ab .
b
The value (a) and the corresponding intermediate line flash.
By using 
and 
, you can adjust the values (first a and then b) to suit the desired stake out distances. Holding the buttons down increases the rate of change of the values.
Once the desired value (a) has been reached it can be confirmed with the 
button.
The value (b) and the intermediate line flashes (the defined value (a) is automatically adopted). Value (b) can be entered using 
and 
.
The defined value (b) is confirmed with the 
button.
Pressing the 
button starts the laser measure- ment. The display shows required stake out distance
EN |
Leica DISTO™ D3 760498a en
11
Functions