Winegard TN2300-DV setup guide To set *86 as the default voicemail number, Restore User Defaults

Page 10

To set *86 as the default voicemail number:

• From Configuration Mode, press

.

To set #86 as the default voicemail number:

• From Configuration Mode, press

.

Restore User Defaults

To restore your TN2300-DV SERIES to its default settings after changing configuration settings:

• From Configuration Mode, press <0 or

1> , where

0 = Keep Current Settings and 1 = Restore to Default Settings.

To access your voicemail, you will have to use the Direct Dial method of voicemail retrieval (see above

For information about your voicemail service, please contact your service provider.

The voicemail settings for your TN2300-DV SERIES should have been configured prior to purchase. The instructions for Voicemail Number and One- Touch Voicemail Retrieval are mainly for your reference.

Using Additional Hardware Devices

Using an External Answering Machine

The TN2300-DV SERIES can be used with an external answering machine in place of voicemail. If you plan to use an external answering machine, be sure your service provider has not activated voicemail on your account

Setting Up Data Transfer for a Digital Video Recorder (DVR) or Satellite Receiver

The TN2300-DV SERIES can be configured to dial out over your phone line so that a Digital Video Recorder (DVR) or a satellite receiver can send and receive the data required for its operation. Your DVR or satellite receiver must also be configured to tell the TN2300-DV SERIES that it needs to send data. You must

insert the prefix before the phone number that the DVR or satellite receiver dials. Consult your DVR or satellite receiver manual or provider if you need further assistance with this feature.

Ver. 1.6

 

8/3/2009

- 10 -

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Direct Connection Phone Connection via Wall JacksMaking Calls Using the TN2300-DV SeriesTo make a call To retrieve a call on hold To access your voicemail using Direct DialTo place a call on hold To answer a call waiting callTo decrease the phone’s volume level To increase the phone’s volume levelTo make a three-way call To enter Configuration Mode To change the Lock CodeTo enable Zero Delay Dialing default setting To adjust your phone system’s audio line levelTo change the auto-send delay To disable Zero Delay DialingTo set the Call Restrict level To disable Call Barring default settingTo set the Call Restrict table entries To disable the Hotline feature default setting To disable Dial Tone After Remote DisconnectTo enable the Hotline feature To enable One-Minute AlertsTo set your phone’s TTY mode To set the default voicemail numberRestore User Defaults To set *86 as the default voicemail numberTo set #86 as the default voicemail number = Keep Current Settings and 1 = Restore to Default SettingsTo set your device to Always fax mode To send a fax 1-time fax modeTo receive a fax 1-time fax mode To make one voice call while in Always fax mode
Top Page Image Contents