Winegard TN2300-DV setup guide To send a fax 1-time fax mode, To receive a fax 1-time fax mode

Page 11

Using a Fax Machine With Your TN2305-DV (Verizon Only)

Your TN2305-DVsupports sending and receiving faxes with a fax machine. You can connect your fax machine to an existing wall phone (RJ11) jack or into either phone (RJ11) jack of the TN2305-DV . In order to send or receive a fax, the TN2305-DV must be placed in fax mode, as it cannot automatically detect an incoming fax. (This is standard procedure for faxing over wireless networks.)

You must disable any “turbo” fax modes or other non-standard transmission modes on your fax machine.

Consult your fax machine’s manual for more information.

The TN2305-DV has two fax modes: 1-time fax mode and Always fax mode.

·1-time fax mode will allow you to send or receive one fax, after which the TN2305-DV will automatically return to voice mode.

·Always fax mode will keep the TN2305-DV in fax mode until it is set back to voice mode.

To send a fax (1-time fax mode):

1.Lift up the fax machine handset or press the Fax button.

2.Press , then dial the fax number.

3.Press Start on the fax machine.

To receive a fax (1-time fax mode):

1.Set your fax machine to connect after the minimum number of rings allowed.

2.Press .

3.Notify the sender that you are prepared to receive the fax.

To set your device to “Always fax mode”:

• Press .

To make one voice call while in “Always fax mode”:

• Press

To return your device to voice mode (default setting):

• Press

.

QUESTIONS? CALL OUR SUPPORT LINE: 877-475-7771 or visit our website FAQ at http://www.winegard.com

TravelNet

Winegard Company

Support: (877) 475-7771

FAX: 847-991-3328

Ver. 1.6

 

8/3/2009

- 11 -

Image 11
Contents Connection via Wall Jacks Direct Connection PhoneTo make a call Using the TN2300-DV SeriesMaking Calls To answer a call waiting call To access your voicemail using Direct DialTo place a call on hold To retrieve a call on holdTo make a three-way call To increase the phone’s volume levelTo decrease the phone’s volume level To change the Lock Code To enter Configuration ModeTo disable Zero Delay Dialing To adjust your phone system’s audio line levelTo change the auto-send delay To enable Zero Delay Dialing default settingTo set the Call Restrict table entries To disable Call Barring default settingTo set the Call Restrict level To enable One-Minute Alerts To disable Dial Tone After Remote DisconnectTo enable the Hotline feature To disable the Hotline feature default settingTo set the default voicemail number To set your phone’s TTY mode= Keep Current Settings and 1 = Restore to Default Settings To set *86 as the default voicemail numberTo set #86 as the default voicemail number Restore User DefaultsTo make one voice call while in Always fax mode To send a fax 1-time fax modeTo receive a fax 1-time fax mode To set your device to Always fax mode