OPERATING MODE
The main purpose of the matrix is to connect inputs to outputs; the front panel is one method of accomplishing this. The main screen is used and will look something like this:
MAIN OPERATING PAGE:
Main operating page with audio option
SELECT
BARCO
PRESET VOL
ESCAPE
Pressing the VIDEO button for connecting video, the AUD button for switching audio, both VIDEO and AUD to switch both. Pressing the VOL button allows the user to select and adjust an output audio level. Pressing the PRESET button allows the user to select a preset to execute.
Main operating page without audio option
SELECT
BARCO
PRESET
ESCAPE
The main screen is used to select the connection type, and which inputs and outputs are to be connected. Pressing the VIDEO button sets the connection as a video connection. Pressing the AUDIO button sets the connection as a audio connection Pressing both the VIDEO and AUDIO buttons indicate that the connection will connect both the video and audio. The user may also press an input or output select button at this screen that would cause the matrix to go into connection mode. When connection mode is entered in that manner, the front panel will light both the audio and video lamps.
The user will normally press an input button first, when that happens if the input is not split it will be
32 | MatrixPRO- II |
