Barco 32X32, 12X8 manual RJ-45 LAN Interface Cabling, RS-232 Remote Host Port Cabling DB9

RJ-45 LAN Interface Cabling

This port is used to access the MatrixPRO-II via TCP-IP from a host computer or network.

Cable type:

RJ-45 Crossover for direct computer to MatrixPRO-II control RJ-45 Straight through for Network to MatrixPRO-II control

Recommended Maximum Length: 329 feet

Crossover Cable Standard Patch Cable

NOTE: The default IP Address is: 192.168.0.244

RS-232 Remote Host Port Cabling (DB9)

The MatrixPRO-II has a standard RS-232 (DB9F) communication port that connects the host PC to the Rack Unit allowing control and configuration.

Cable Type: Straight through DB-9 Male (To mate with Female on Rack Unit) to DB-9 Male (to mate with DB-9 Male on typical PC COMM port).

Recommended Maximum Length: 50 ft

PC			CABLE
(typical)
DB9M				RN Remote
					RS-232
(DTE)		DB9F	DB9M
				Host Port
RX	2	2	2	2	TX
TX	3	3	3	3	RX
GND	5	5	5	5	GND
		Optional Flow Control Connections
CTS	8	8	8	8	RTS
RTS	7	7	7	7	CTS
DSR	6	6	If the device requires DSR, CD, or DTR,
CD	2	2
			implement loop -back handshake at the
DTR	4	4	device end of the cable as shown .

16 MatrixPRO- II