Barco 32X32, 12X8 manual ScreenPRO-II/ScreenPRO-II CONTROLLER SETUP, Configuring the ScreenPRO-II

ScreenPRO-II/ScreenPRO-II CONTROLLER SETUP

Configuring the ScreenPRO-II

The ScreenPRO-II is configured with an IP address compatible with the ScreenPRO-II controller. The address is 192.168.0.244. The IP port address is also configured to Port 23. No other configuration is necessary.

Setting Up the ScreenPRO-II Controller

To set up the Controller to recognize the ScreenPRO-II the user starts at the main controller screen and will select ‘SYSTEM’. The main screen with the ‘SYSTEM’ button is shown below:

The user will touch the ‘SYSTEM’ button on the controller which will then bring up the ‘SYSTEM MENU’ the user would then press the ‘ROUTER SETUP’ button. The ‘SYSTEM MENU’ with the ‘SYSTEM MENU’ button highlighted is shown below:

MatrixPRO- II 37