Barco 32X32, 12X8, matrixpro-II 12x8 manual Video Type, MatrixPRO

VIDEO TYPE

A unique feature of the MatrixPRO-II series is the ability to configure outputs (and inputs) for not only the default video type, but also be able to split the port in order to output video types. When an output is set to split mode, an RGB matrix port can be configured as:

•One RGB port, (Default)

•One Component video

•One S-Video and one composite

•Three Composites.

The ports will default to RGB.and NATIVE for the VIDEO TYPE.

If the user wishes to split an output in order to use another video type(s), the user positions the cursor to VIDEO TYPE and presses SELECT. The user can toggle between NATIVE and SPLIT by using the up and down buttons.

If the output is split and the user selects NATIVE, the front panel will simply return to the default video setting of RGB.

If the user chooses SPLIT , and presses the SELECT button, the screen will change to allow the user to scroll through and select one of five pre-defined split configurations. The screen will look like this:

SELECT

SPLIT SETUP

>A RGB

B RGB

C RGB

SAVE

ESCAPE

The "A-B-C" (labeled R-G-B on the unit) designations refer to the physical location of the video cards from top to bottom in the MatrixPRO-II chassis Pressing the UP and DOWN buttons will scroll through the five available configurations. In this example the output is set to one S-video and one Composite video

SELECT

SPLIT SETUP

*A SVIDEO

B SVIDEO

C COMPOSITE

SAVE

ESCAPE

Pressing SAVE will store the selected configuration for that output. The user can then select another output to set up, or press the ESCAPE button to return to the OUTPUT SETUP menu.

MatrixPRO- II 25