To disable Dial Tone After Remote Disconnect

To disable Dial Tone After Remote Disconnect:

• From Configuration Mode, press . If Dial Tone After Remote Disconnect is disabled, additional remote

disconnect options may be available. See “Disconnect Tone” on page 33 for more information.

Hotline

The Hotline feature allows you to program the TN2300-DV SERIES to automatically dial a specific phone number after a selected timeout delay whenever you take the phone off-hook.

To program the Hotline phone number:

• From Configuration Mode, press <phone #>

, where

<phone #> is the phone number you want to dial automatically.

To enable the Hotline feature:

• From Configuration Mode, press

<1 - 8> , where <1 - 8> equals the selected timeout delay, in seconds.

(For example, if you wanted the phone to wait five seconds before dialing the hotline number, you would press from configuration mode.)

To disable the Hotline feature (default setting):

• From Configuration Mode, press .

One-Minute Alert

You can keep track of your in-call duration by configuring your TN2300-DV SERIES to sound a short beep at one-minute intervals during active calls.

To enable One-Minute Alerts:

• From Configuration Mode, press

To disable One-Minute Alerts (default):

• From Configuration Mode, press

TTY Use

ATTY device (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities to communicate by telephone. Your TN2300-DV SERIES is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission.

To establish TTY service, contact your cellular service provider.

Ver. 1.6
8/3/2009	- 8 -