Message Codes
If the message Error does not disappear after switching on the device repeatedly, contact the dealer.
If the message InFo appears with a number, press the Clear button and observe the following instructions:
No. | Cause | Correction |
156 | Transverse tilt greater | Hold the instrument |
| than 10° | without any transverse tilt. |
|
|
|
162 | Calibration mistake | Make sure, the device is |
|
| placed on a absolutely |
|
| horizontal and flat surface. |
|
| Repeat the calibration |
|
| procedure. If the mistake |
|
| still occurs, contact your |
|
| dealer. |
204 | Calculation error | Perform measurement |
|
| again. |
252 | Temperature too high | Let device cool down. |
|
|
|
253 | Temperature too low | Warm device up. |
|
|
|
255 | Received signal too | Change target surface |
| weak, measuring time | (e.g. white paper). |
| too long |
|
|
|
|
256 | Received signal too | Change target surface |
| high | (e.g. white paper). |
|
|
|
257 | Too much back- | Shadow target area. |
| ground light |
|
|
|
|
258 | Measurement outside | Correct range. |
| of measuring range |
|
|
|
|
260 | Laser beam inter- | Repeat measurement. |
| rupted |
|
|
|
|
Care
•Clean the device with a damp, soft cloth.
•Never immerse the device in water.
•Never use aggressive cleaning agents or solvents.
Warranty
The device comes with a
Safety Instructions | EN |
The person responsible for the instrument must ensure that all users understand these directions and adhere to them.
Areas of responsibility
Responsibilities of the manufacturer of the original equipment:
Leica Geosystems AG
The company above is responsible for supplying the product, including the User Manual in a completely safe condition.
The company above is not responsible for third party accessories.
Responsibilities of the person in charge of the instrument:
•To understand the safety instructions on the product and the instructions in the User Manual.
•To be familiar with local safety regulations relating to accident prevention.
•Always prevent access to the product by unauthorised personnel.
Leica DISTOTM E7400x 788480a | 18 |
|
|