Leica 788472 manual Area, Partial Measurements

Page 9

Measuring Functions

Area

EN

1x

1

2

3

4

		The result is shown in the main line
5	i	and the measured value above.
5	i	Partial Measurements:

Aim laser at first target point.

Aim laser at sec- ond target point.

24.352 m2

Press + or - after starting the first measurement. Measure and add or subtract distances. Finish with DIST. Measure 2nd length.

6

2 sec

19.823 m			Circumference

24.352 m	2		Area

Leica DISTOTM E7400x 788480a	8

Image 9

Contents Original laser distance meter Leica Distotm E7400xTable of Contents Introduction Overview Instrument Set-upDisplay Insert batteries When batteryBle use, do not BatteriesAdjusting measuring reference / tripod Switching ON/OFF ClearOperations Press button 2 sec and ref- i erence from Distance unit setting Tilt unit setting Timer automatic release Multifunctional endpiece Keypad lock on Keypad lock OFF Beep ON/OFF Illumination ON/OFFMeasuring single distance Measuring FunctionsPermament / Minimum-Maximum measuring Add / SubtractPartial Measurements AreaVolume Aim laser at first Aim laser at sec Triangular areaAim laser at upper point Pythagoras 3-pointAim laser at lower point Result is shown in the main AbovePythagoras partial height Aim laser at 2ndPoint Tangular point Stake out Height tracking Smart Horizontal ModeAim laser at tar- get Up to 360 and a transverse tilt of ±10Memory is completely deleted Memory 20 last displays Delete MemoryCalibration of tilt sensor Tilt Calibration CalibrationTilt measurements a transverse tilt should be avoided Technical DataMessage Codes Warranty Safety InstructionsCare Areas of responsibilityProhibited use Permitted useHazards in use Limits of useFCC statement applicable in U.S Laser classificationLabelling