Safety Instructions
Permitted use
•Measuring distances
•Tilt measurement
Prohibited use
•Using the product without instruction
•Using outside the stated limits
•Deactivation of safety systems and removal of explanatory and hazard labels
•Opening of the equipment by using tools (screwdrivers, etc.)
•Carrying out modification or conversion of the product
•Use of accessories from other manufac- turers without express approval
•Deliberate dazzling of third parties; also in the dark
•Inadequate safeguards at the surveying site (e.g. when measuring on roads, construc- tion sites, etc.)
•Deliberate or irresponsible behaviour on scaffolding, when using ladders, when measuring near machines which are running or near parts of machines or instal- lations which are unprotected
•Aiming directly in the sun
Hazards in use
WARNING
Watch out for erroneous measurements if the instrument is defective or if it has been dropped or has been misused or modified. Carry out periodic test measurements.
Particularly after the instrument has been subject to abnormal use, and before, during and after important measurements.
CAUTION
Never attempt to repair the product your- self. In case of damage, contact a local dealer.
WARNING
Changes or modifications not expressly approved could void the user’s authority to operate the equipment.
Limits of use
iRefer to section "Technical data". The device is designed for use in areas
permanently habitable by humans. Do not use the product in explosion hazardous areas or in aggressive environments.
EN
Disposal
CAUTION
Flat batteries must not be disposed of with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations.
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national regu- lations in force in your country.
Adhere to the national and country specific regulations.
Product specific treatment and waste management can be downloaded from our homepage.
Electromagnetic Compatibility (EMC)
WARNING
The device conforms to the most stringent requirements of the relevant standards and regulations.
Yet, the possibility of causing interference in other devices cannot be totally excluded.
Leica DISTOTM E7400x 788480a | 19 |
|
|