Black & Decker BDL300S Removing Laser from Tripod, Hanging the Laser, Turning the Laser on

Page 4

586017-00 BDL300S laser 7/30/03 8:51 AM Page 4

REMOVING LASER FROM TRIPOD

The laser can be removed from the tripod for use on any horizontal surface such as a floor or a tabletop.

CAUTION: Make sure laser is secure and on a stable surface.

Remove the laser by pressing in on the two spring loaded tabs shown in figure 9 and lifting the laser off the tripod. To reattach laser to tripod, grasp the tripod top plate to support, align notches in laser with tabs (buttons) on plate. Press laser down until the tabs to lock into place. Make sure laser is securely fastened.

9

HANGING THE LASER

 

 

The laser can also be hung

10

11

from a joist or other secure

structure using the hanging

 

 

strap included.

 

 

CAUTION: Make sure laser is securely suspended by the strap.

To hang, thread the strap through the slot in the top of the laser and fasten the hook as shown in figures 10 and

11.Adjust the laser so that it hangs relatively straight. The

self-leveling function will then compensate for any minor error.

LASER OPERATION

•Before attempting to use the laser, make sure the tool is positioned on a relatively smooth, flat and stable surface.

•To increase working distance and accuracy, set up the laser in the middle of your working area. Brightness of area may effect line visibility.

•When attaching to the tripod or using the hanging strap, mount the laser securely.

•Be aware that extreme temperature changes can cause movement or shifting of building structures, tripods, equipment, etc. which can effect accuracy. Verify your set-up before each use as the laser may have moved.

•This product is not recommended for outdoor use.

TURNING THE LASER ON

To turn the laser on, slide the lower on/off switch shown in figure 12 to the right.

12

OPERATING IN SINGLE 120˚ LASER MODE

To operate the laser using a single laser beam, slide the upper switch to the left as shown in figure 13.

13

OPERATING IN 360˚ LASER MODE

To operate the laser using all 3 laser beams, slide the upper switch to the right as shown in figure 14.

14

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instruction Manual BDL300SSafety Instructions Assembly / SET-UP Installing the BatteryAdjusting the Tripod Unfolding the Laser LegsOperating in Single 120˚ Laser Mode Operating in 360˚ Laser ModeRemoving Laser from Tripod Hanging the LaserProblem Possible Cause Solution MaintenanceAccessories Service Information Full TWO-YEAR Home USE WarrantyGuide D’UTILISATION Consignes DE SécuritéInstallation DE LA Pile Assemblage ET InstallationDéploiement DES Pattes DU Laser Retrait DU Laser Hors DU Trépied Réglage DU TrépiedSuspension DU Laser Fonctionnement EN Mode Laser Simple DE Fonctionnement EN Mode Laser DEFonctionnement DU Laser Mise EN Marche DU LaserProblème Cause probable Solution AccessoiresInformation SUR LES Services Garantie Complète DE Deux ANS Pour Usage RésidentielManual DE Instrucciones Instrucciones DE SeguridadInstalación DE LA Pila Ensamblaje / MontajeCómo Extender LAS Patas DEL Láser Cómo Separar EL Láser DEL Trípode Cómo Ajustar EL TrípodeCómo Colgar EL Láser Funcionamiento DEL Láser Problema Posible causa Solución BDL300S586017-00 BDL300S laser 7/30/03 852 AM

BDL300S specifications

The Black & Decker BDL300S is a versatile and user-friendly stud finder designed for both DIY enthusiasts and professionals alike. This innovative tool streamlines the process of locating wooden studs, metal pipes, and live AC wires behind the walls, ensuring that your drilling and installation tasks are executed with precision and confidence.

One of the most notable features of the BDL300S is its advanced laser level functionality. This built-in feature allows users to have a clear horizontal or vertical reference line, making it ideal for hanging shelves, pictures, or installing cabinets. The laser level beams are bright and easy to see, even in well-lit rooms, providing an accurate guideline to follow.

The BDL300S is engineered with a user-friendly interface that includes a one-button operation. Simply press the button to begin scanning, and the tool will provide instant feedback on the location of studs or wires. This straightforward approach eliminates the guesswork, allowing users to work quickly and efficiently.

In terms of technology, the Black & Decker BDL300S utilizes a reliable electronic sensor system that delivers precise accuracy. This sensor can detect wooden studs up to 3/4 inch in depth and metal studs or pipes at varying depths, making it suitable for various wall constructions. The tool also features a built-in audio alert system that beeps when a stud or wire is detected, providing an auditory signal that complements the visual indicators.

The ergonomic design of the BDL300S ensures comfort during prolonged use. Its lightweight construction and easy-grip handle allow for extended operation without causing fatigue. The compact size makes it portable and easy to store, which is particularly advantageous for professionals who often work on different job sites.

Moreover, the device includes an LCD display that provides real-time visual feedback, indicating whether the user is over a stud or a live wire. This display enhances the overall user experience, combining simplicity with high functionality.

In conclusion, the Black & Decker BDL300S is an innovative tool that combines a stud finder with laser leveling capabilities, making it an essential addition to any toolbox. With features that prioritize accuracy, ease of use, and effective technology, it stands out as a reliable choice for skilled tradespeople and DIY home improvement projects alike. Whether you are hanging décor or performing renovations, the BDL300S offers a practical solution for achieving professional results.
Top Page Image Contents