Black & Decker BDL300S Problem Possible Cause Solution, Storage, Maintenance, Accessories

Page 5

586017-00 BDL300S laser 7/30/03 8:51 AM Page 5

TROUBLESHOOTING

 

Problem

Possible Cause

Solution

 

 

• Laser does not project on

• The self leveling range

• Position tripod ona relatively

 

wall.

for the level line is +/- 5°.

smooth and level surface.

 

• Line only visible on one wall.

• Switch in 120° mode.

• Move switch t 360° mode.

 

• Laser beam dim.

• Weak battery.

• Replace battery

 

 

 

 

 

 

 

STORAGE

To store the unit, reattach the laser to the top of the tripod making sure that it snaps into place securely. Loosen the locking knob, turn the fine adjust knob to its lowest setting and return the tripod to its lowest position. Unhinge the legs and fold them into the center. Reattach the strap around housing. Always store the laser indoors and in its closed state with the switch in the “OFF” position.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-54-HOW-TO (544-6986).

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under "Tools-Electric" in the yellow pages of the phone directory and on our website www.blackanddecker.com.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents BDL300S Instruction ManualSafety Instructions Installing the Battery Assembly / SET-UPAdjusting the Tripod Unfolding the Laser LegsOperating in 360˚ Laser Mode Operating in Single 120˚ Laser ModeRemoving Laser from Tripod Hanging the LaserMaintenance Problem Possible Cause SolutionAccessories Service Information Full TWO-YEAR Home USE WarrantyConsignes DE Sécurité Guide D’UTILISATIONDéploiement DES Pattes DU Laser Assemblage ET InstallationInstallation DE LA Pile Suspension DU Laser Réglage DU TrépiedRetrait DU Laser Hors DU Trépied Fonctionnement EN Mode Laser DE Fonctionnement EN Mode Laser Simple DEFonctionnement DU Laser Mise EN Marche DU LaserAccessoires Problème Cause probable SolutionInformation SUR LES Services Garantie Complète DE Deux ANS Pour Usage RésidentielInstrucciones DE Seguridad Manual DE InstruccionesCómo Extender LAS Patas DEL Láser Ensamblaje / MontajeInstalación DE LA Pila Cómo Colgar EL Láser Cómo Ajustar EL TrípodeCómo Separar EL Láser DEL Trípode Funcionamiento DEL Láser BDL300S Problema Posible causa Solución586017-00 BDL300S laser 7/30/03 852 AM

BDL300S specifications

The Black & Decker BDL300S is a versatile and user-friendly stud finder designed for both DIY enthusiasts and professionals alike. This innovative tool streamlines the process of locating wooden studs, metal pipes, and live AC wires behind the walls, ensuring that your drilling and installation tasks are executed with precision and confidence.

One of the most notable features of the BDL300S is its advanced laser level functionality. This built-in feature allows users to have a clear horizontal or vertical reference line, making it ideal for hanging shelves, pictures, or installing cabinets. The laser level beams are bright and easy to see, even in well-lit rooms, providing an accurate guideline to follow.

The BDL300S is engineered with a user-friendly interface that includes a one-button operation. Simply press the button to begin scanning, and the tool will provide instant feedback on the location of studs or wires. This straightforward approach eliminates the guesswork, allowing users to work quickly and efficiently.

In terms of technology, the Black & Decker BDL300S utilizes a reliable electronic sensor system that delivers precise accuracy. This sensor can detect wooden studs up to 3/4 inch in depth and metal studs or pipes at varying depths, making it suitable for various wall constructions. The tool also features a built-in audio alert system that beeps when a stud or wire is detected, providing an auditory signal that complements the visual indicators.

The ergonomic design of the BDL300S ensures comfort during prolonged use. Its lightweight construction and easy-grip handle allow for extended operation without causing fatigue. The compact size makes it portable and easy to store, which is particularly advantageous for professionals who often work on different job sites.

Moreover, the device includes an LCD display that provides real-time visual feedback, indicating whether the user is over a stud or a live wire. This display enhances the overall user experience, combining simplicity with high functionality.

In conclusion, the Black & Decker BDL300S is an innovative tool that combines a stud finder with laser leveling capabilities, making it an essential addition to any toolbox. With features that prioritize accuracy, ease of use, and effective technology, it stands out as a reliable choice for skilled tradespeople and DIY home improvement projects alike. Whether you are hanging décor or performing renovations, the BDL300S offers a practical solution for achieving professional results.
Top Page Image Contents