daf220_bu_2609140572_003.fm Seite 9 Montag, 8. September 2008 2:22 14
9
Spare Parts
Battery compartment
cover . . . . . . . . . . . . 1 609 203 928
End cap . . . . . . . . . . 1 609 203 770
Joint cover. . . . . . . . 1 609 203 927
Preparation
Insert the batteries before putting into operation for the first time. Slide the battery compartment cover 4 in the direction of the rect- angle point and open. While insert- ing the batteries, make sure that they are properly oriented
(see Figure B).
The tool automatically switches on after the insertion of the batteries. All display segments appear for about 5 seconds while the unit per- forms a self check and calibration. Once it is completed, the tool dis- plays the “current angle”; that is, the present angle between the legs.
When the battery indicator 
stays on, it indicates that the bat- teries are running low and that measurements can be made only for about another
Switching On and Off
–ON: Press button 11. All seg- ments of the angle display ap- pear briefly.
–OFF: When the tool is in the nor- mal measuring mode, press but- ton 11 for less than 1 second.
After 3 minutes without button actuation or angle change, the tool switches off automatically to maxi- mize battery life.
| Bosch Power Tools | 2 609 140 572 (8.9.08) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|