Electrical Requirements

BP7354 CF200 9/19/07 11:30 AM Page 5

2. Slide the four switch levers on the code switch to your choice of ON (up) or down positions. Use a ball-point pen or small screwdriver and slide the levers firmly up or down.

3. In the receiver (Figure 1), slide the four switch levers to the same positions as set in the transmitter. Make sure the levers on both switches are in the same positions, otherwise the fan will not operate.

4. Position the battery in the transmitter battery compartment and replace the battery cover.

CEILING FAN

PROCEDURES

Your new ceiling fan will require a ground- ed electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws sup- plied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electri- cian if in doubt.

!WARNING

To avoid possible fire or shock, fol- low all wiring instructions carefully.

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the exist- ing light fixture.

!WARNING

Turning off wall switch is not suffi- cient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceil- ing fan must be properly grounded as a precaution against possible electri- cal shock.

How to Assemble Your Ceiling Fan

1. Mount the fan blades to the blade flanges using three 10-24 x 9mm truss head screws and three fiber washers (supplied) (Figure 2).

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balanc- ing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

	FIBER	10-24 X 9mm
	WASHER (3)	10-24 X 9mm
	WASHER (3)	TRUSS HEAD
		SCREW (3)
		FAN BLADE
		BLADE FLANGE

Figure 2

2. Remove and discard the three shipping retainers securing the motor hub in the motor housing.

NOTE: Take care not to scratch the fan housing when installing the blade assemblies.

3. Insert a 1/4-20 x 11mm pan head screw with lockwashers into each of the two recessed holes in one of the blade flanges.

5	U.L. Model No.: CF200

CF200n100 specifications

The Emerson CF200N100 is a cutting-edge fan controller designed to provide optimal air circulation and temperature control in various environments. Known for its efficiency and advanced features, this model has found applications in residential, commercial, and industrial settings.

One of the standout characteristics of the CF200N100 is its energy efficiency. Designed to operate with minimal power consumption, this unit helps reduce electricity costs while maintaining effective airflow. It integrates advanced technologies that allow for precise control over fan speed, facilitating customized air distribution according to specific needs.

The CF200N100 employs a microprocessor-based control system that enhances stability and reliability. This technology allows for intelligent programming, enabling users to set specific temperature thresholds and operational schedules. With a user-friendly interface, the controller simplifies adjustments and makes it convenient to monitor performance.

Another significant feature of the Emerson CF200N100 is its compatibility with various fan types and setups. Whether used in ducted systems or standalone fans, the controller can adapt to different configurations, making it a versatile choice for any installation. Its flexibility also extends to integration with existing HVAC systems, providing seamless functionality in retrofitting scenarios.

The unit showcases various safety features, including overcurrent protection and temperature monitoring, ensuring that both the device and connected fans operate within safe limits. This not only prolongs the lifespan of the equipment but also enhances user peace of mind.

For communication, the CF200N100 is equipped with advanced connectivity options, allowing for integration with smart home systems. Users can control fan settings remotely, making adjustments from anywhere through compatible devices. This capability not only adds convenience but also allows for real-time monitoring of environmental conditions.

The design of the Emerson CF200N100 is compact, ensuring that it can be installed in tight spaces without compromising performance. Its robust construction contributes to its durability, ensuring that it withstands the demands of continuous operation.

In summary, the Emerson CF200N100 is a feature-rich fan controller that promises efficiency, flexibility, and advanced control. Its energy-saving technologies, user-friendly design, and integration options make it an excellent choice for anyone looking to improve their air circulation systems. Whether for residential use or in more demanding commercial settings, the CF200N100 stands out as a reliable solution in modern climate control management.